||<>|| = Verizon Bluetooth dial-up networking = This information complements the more generic BluetoothDialup guide. ==== EVDO Configuration ==== This has been tested and worked on the EVDO network but not on the 1xRTT net. (See the 1x configuration below) This file is {{{/etc/chatscripts/verizon}}}: {{{ # abortstring ABORT 'NO CARRIER' ABORT 'ERROR' ABORT 'NO DIALTONE' ABORT 'BUSY' ABORT 'NO ANSWER' # modeminit '' ATZ # ispnumber OK-AT-OKL3 ATDT#777 # ispconnect CONNECT \d\c }}} The corresponding {{{/etc/ppp/peers/verizon}}} file looks like this (replace the XXX with your phone #): {{{ hide-password /dev/rfcomm0 connect "/usr/sbin/chat -v -f /etc/chatscripts/verizon" noauth defaultroute usepeerdns connect-delay 10000 user "XXX-XXX-XXXX@vzw3g.com" lock lcp-echo-failure 4 lcp-echo-interval 65535 115200 }}} ==== 1xRTT Configuration ==== The following configuration has been tested and worked on the 1xRTT but not EVDO. This file is {{{/etc/ppp/peers/1x}}}: {{{ hide-password /dev/rfcomm0 connect "/usr/sbin/chat -v -f /etc/chatscripts/1x" noauth defaultroute usepeerdns connect-delay 10000 user "qnc" password "qnc" lcp-echo-failure 4 lcp-echo-interval 65535s 115200 }}} This file is {{{/etc/chatscripts/1x}}}: {{{ # abortstring ABORT 'NO CARRIER' ABORT 'ERROR' ABORT 'NO DIALTONE' ABORT 'BUSY' ABORT 'NO ANSWER' # modeminit '' AT$QCMDR=2 # ispnumber OK-AT-OKL3 ATDT#777 # ispconnect CONNECT \d\c }}} ---- CategoryBluetooth