|
Needs Updating |
Parent: Wifi Wireless Cards Supported | Discuss this page
Summary
- Model - This is the full device model as noted on the box.
Chipset - Chipset vendor name, chipset name, vendor code, and device code. For example, if one was looking for a PCI device:
lspci -vvnn | grep Network 04:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
It's the 'Realtek', 'RTL8188CE', and '[10ec:8176] (rev 01)'.
Driver - For a PCI device:
lspci -vvnn | grep -A 9 Network | grep Kernel Kernel driver in use: rtl8192ceIt's the 'rtl8192ce'.
- Works "out of the box"
- Yes - It works perfectly with no manual modifications, or degraded performance.
- No - It doesn't work at all, has degraded performance, or requires manual configuration to make it work. Please add a comment to what you had to do to get it to work if this was possible, as well as a URL to an outstanding Launchpad bug report to address the issues encountered.
PCMCIA
Model |
Chipset |
Driver |
Works "out of the box" |
Comments |
Last Updated |
3CRWE154A72 |
? |
ndiswrapper |
No |
Use instructions from Ubuntu Wiki. Active scanning network manager causes connection drop. |
15/11/2005 |
3CRWE154G72 |
? |
prism54 |
No |
Broken in Karmic - card just doesn't work. |
30-Oct-09 |
3CRSHPW196 |
? |
atmel |
Yes |
Get the atmel wireless drivers from synaptic (atmelwlandriver-source) if you are having problems. The retractable Xjack antenna makes it worth having! Seems to work fine with Edgy, even VPN (Cisco 3000) and WPA (wpa_supplicant) seem to be no Problem |
28-11-2006 |
3CRSHPW696 |
? |
atmel |
Yes |
Works well with EDGY, hotpluggable. Tested with xubuntu. |
5-11-2006 |
PCILowProfile
Model |
Chipset |
Driver |
Works "out of the box" |
Comments |
Last Updated |
3CRDAG675B |
Atheros AR5006X |
madwifi? |
Yes |
Works out of the box on 7.04 (Feisty Fawn) - also with WPA and signal strength detection (install linux-restricted-modules for your kernel if it isn't detected - it uses the madwifi driver). |
2007-05-31 |
PCI
Model |
Chipset |
Driver |
Works "out of the box" |
Comments |
Last Updated |
3CRWE777A-E1 |
?? |
?? |
Yes |
Worked out of the box (Edgy) on an open network and WEP, with WPA after adding NetworkManager |
2007-01-19 |
USB
Model |
Chipset |
Driver |
Works "out of the box" |
Comments |
Last Updated |
3CRUSB10075 |
? |
zd1211 |
No |
Works on Dapper using network administration tool with no encryption (WEP not tested). Not detected by network-manager (so no WPA) |
2007-1-14 |
3CRUSB10075 |
? |
zd1211 |
Yes |
Works out of the box on Feisty (including WPA encryption) |
2007-08-27 |
3CRUSB10075 |
? |
zd1211rw |
Yes |
Tested with WPA, works. Device is not named. Name in nm-applet (network manager) is "Unknown USB Interface" and signal for all AP's are at 100% (not accurate). Name in lsusb is blank. Nevertheless, it works. |
2008-06-06 |