||<>|| = Introduction = ##Most people using this page are going to be very new. Simple, best compatibility, and the least amount of clicks/programs/skills required. Some things to keep in mind, additional software required to supplement missing functions should use free open source software, limited prerequisites, and should keep with the spirit of Ubuntu whenever possible. This page gets translated into a few different languages, if at all possible any additional software should also be available in as many native languages as possible. ##For additional discussion on this topic, see the comments at https://help.ubuntu.com/community/BurningIsoHowto, and attempt to keep this page aligned with that in both tone and manner. '''Note:''' Ubuntu is primarily distributed over the Internet as CD/DVD image files, called ISOs. If you have downloaded an ISO image, ''please refer instead'' to [[../FromUSBStick]] (to install an ISO image on a USB flash drive) or BurningIsoHowto (to burn an ISO image onto a CD-ROM). The Ubuntu 9.04 netbook remix and some specialized machine images are distributed as disk image files, called IMGs. A typical example is operating systems for Raspberry Pi. This page describes how to install from a .IMG file. You need to write the downloaded IMG image to a device that your computer can boot from. For netbooks this is usually a flash memory device, such as a USB flash drive or SD memory card. You can also write the IMG file to an external USB hard drive, although these instructions use the term "flash media". The device must have sufficient capacity for the install (1 GB or larger is recommended), and you may need a USB adapter or SD card reader on your computer in order to write to it. '''Warning: This will destroy all data on the destination device.''' Please backup all data to other media before proceeding. Be sure to verify that your computer supports booting from the device you have selected for installation. Many computers can boot from a USB drive, and some from other sources. Check the documentation on your specific model of computer for the procedure to boot from the selected device. The GettingUbuntu page has links to the IMG and ISO image files, as well as other methods of GettingUbuntu. == MD5 Sums == Before writing your flash, it is ''highly recommended'' that you verify the md5 sum (hash) of the .img file. For instructions, please see [[HowToMD5SUM]]. For the current list of Official Ubuntu MD5 hashes, see the MD5SUMS file for the release you're using under http://releases.ubuntu.com (and optionally the [[GnuPrivacyGuardHowto|PGP]] signatures in the MD5SUMS.gpg file), or see UbuntuHashes. This ensures that the file was not damaged during the download process and is 100% intact. = Windows = == Graphical Interface == Links that describe the Win32 Disk Imager with more details: '''[[https://wiki.ubuntu.com/Win32DiskImager|Win32DiskImager]]''' [[https://wiki.ubuntu.com/Win32DiskImager/compressed-image_2_USB-or-SD|Win32DiskImager/compressed-image 2 USB-or-SD]] {{attachment:win32-imagewriter.png}} 1. Visit the Ubuntu download site (for example, http://www.ubuntu.com/download/desktop ) and download the *.ISO file corresponding to the version of Ubuntu that you want (you probably want Ubuntu 12.04 for 64-bit PCs) 1. Download Disk Imager from https://sourceforge.net/projects/win32diskimager/files/Archive/Win32DiskImager-0.9.5-install.exe/download and install the program. It will create a start menu entry under Image Writer, called '!Win32DiskImager'. You should see a window like the screen shot above. 1. Insert your flash media 1. Note the drive letter assigned to your flash media 1. Start Disk Imager. It will autodetect USB devices. 1. Select the downloaded file and target device, and click "Write" 1. Remove your flash media when the operation is complete == Command Line Interface == 1. Download the desired .img file 1. Download flashnul from http://shounen.ru/soft/flashnul/index.html#download 1. Attach your USB drive 1. Run {{{flashnul -p}}} 1. Note the physical device number for the USB drive 1. Run {{{flashnul -L \path\to\downloaded.img}}} 1. Answer "yes" if the selected destination device is correct 1. Remove your USB drive when the command completes = Ubuntu = == Graphical Interface (up to 12.10, for later versions use mkusb or the commandline method below) == {{attachment:usb-imagewriter.png}} 1. Download the desired .img file 1. Install the usb-imagewriter package * If your release does not include this, download it from [[https://launchpad.net/~ogra/+archive|Oliver's PPA]] * If imagewriter fails to launch, you may need to install python glade2 support. Install the python-glade2 package or Run {{{sudo apt-get install python-glade2}}} * If your release does not include it and you are running 9.04 Jaunty Jackalope then run this command from the console: {{{sudo apt-get install usb-imagewriter}}} 1. Open Applications -> Accessories -> Image Writer * KDE users will find this in Applications -> Utilities -> Image Writer * from the command line, from the console: {{{sudo imagewriter}}} * on some usb-imagewriter versions (console command: imagewriter) the application fails to write if the image path contains blank spaces, exiting with "IndexError: list index out of range". 1. Insert your flash media 1. Select the downloaded file and flash device, and click "Write to Device" 1. Remove your device when the operation is complete == mkusb == {{attachment:../../mkusb/pictures/16-mkusb-quick-start-manual-12.png}} * Download the desired .img file * Install mkusb from the PPA with the following command lines If you run standard Ubuntu, you need an extra instruction to get the repository Universe. (Kubuntu, Lubuntu ... Xubuntu have the repository Universe activated automatically.) {{{ sudo add-apt-repository universe # only for standard Ubuntu sudo add-apt-repository ppa:mkusb/ppa # and press Enter sudo apt-get update sudo apt-get install mkusb mkusb-nox usb-pack-efi }}} * Follow the instructions in the quick start manual. * View or download the '''quick start manual [[http://phillw.net/isos/linux-tools/mkusb/mkUSB-quick-start-manual.pdf]]''' * Alternate link to the '''quick start manual version 11''' [[attachment:../../mkusb/mkUSB-quick-start-manual-11.pdf]] * Alternate link to the '''quick start manual version 12 alias dus''' [[attachment:../../mkusb/mkUSB-quick-start-manual-12.pdf]] * Read more about mkusb at this link: [[https://help.ubuntu.com/community/mkusb]] == Command Line Interface == Be very careful about which /dev device you write to. If your machine is booted up off of disk /dev/sda, and your usb stick is on /dev/sdc, and you accidentally write to /dev/sda instead of /dev/sdc, your filesystem will be irreparably damaged and you will lose all of your files. 1. Download the desired .img file 1. Open a terminal and insert your flash media 1. Look at the output of {{{sudo dmesg | tail -20}}} to determine the device node assigned to your flash media (ignore the device number; e.g. /dev/sdc, not sdc1) * Example output of dmesg, where the device node is 'sdc': * {{{[ 5046.396364] usb-storage: device scan complete}}} * {{{[ 5046.397075] scsi 10:0:0:0: Direct-Access USB Flash Memory 1.00 PQ: 0 ANSI: 0 CCS}}} * {{{[ 5047.068761] sd 10:0:0:0: [sdc] Mode Sense: 23 00 00 00}}} * {{{[ 5047.068769] sd 10:0:0:0: [sdc] Assuming drive cache: write through}}} * {{{[ 5047.075021] sdc: sdc1}}} * {{{[ 5047.076459] sd 10:0:0:0: [sdc] Attached SCSI removable disk}}} 1. Run {{{sudo umount /dev/devicenode}}} 1. Run {{{sudo dd if=/path/to/downloaded.img of=/dev/devicenode bs=1M}}} 1. Remove your flash media when the command completes (you may need to wait a few extra seconds for it to finish) = Mac OS X = == Command Line Interface == 1. Download the desired .img file 1. Open a Terminal (in /Applications/Utilities/) 1. Run {{{diskutil list}}} to get the current list of devices 1. Insert your flash media 1. Run {{{diskutil list}}} again and determine the device node assigned to your flash media (e.g. /dev/disk2) 1. Run {{{diskutil unmountDisk /dev/disk}}}''N'' (replace ''N'' with the disk number from the last command; in the previous example, ''N'' would be {{{2}}}) 1. Execute {{{sudo dd if=/path/to/downloaded.img of=/dev/rdisk}}}''N'' {{{bs=1m}}} (replace {{{/path/to/downloaded.img}}} with the path where the image file is located; for example, {{{./ubuntu.img}}}, {{{/dev/rdiskN}}} is faster than {{{/dev/diskN}}}). If you see the error {{{dd: Invalid number `1m'}}}, you are using GNU dd. Use the same command but replace {{{bs=1m}}} with {{{bs=1M}}}. 1. Run {{{diskutil eject /dev/disk}}}''N'' and remove your flash media when the command completes ---- CategoryLive CategoryLive