## Page copied from MacBookPro-5-5/Lucid ## and then from MacBookPro-6-2/Lucid ## and then from MacBookPro6-2/Maverick ## and then from MacBookPro5-3/Maverick ## and then from MacBookPro5-3/Natty ||<>|| The [[MacBookPro|Macbook Pro]] 5,3 is compatible with Ubuntu 12.04 Precise Pangolin. You'll need to apply some of the adjustments listed below. For further discusions, see: [[http://ubuntuforums.org/forumdisplay.php?f=328|Ubuntu Apple Users forum]] == MacBookPro 5,3 and Ubuntu 12.04 LTS == This page aims to describe the steps needed, to fully enable all features of the '''15.4 inch 5-th Generation MacBookPro Aluminium (Unibody)''' (release date: June 2009) when using '''Ubuntu 12.04 (Precise Pangolin)'''. ||{{attachment:IconsPage/terminal.png}}|| You can find out, what model you have by typing at the terminal: {{{ sudo dmidecode -s system-product-name }}} If you have a different model, please go [[https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages|here]] and find the right wiki. == Overview == Anything not mentioned here probably already works out of the box. If not, please refer to the [[http://ubuntuforums.org/forumdisplay.php?f=328|Ubuntu Apple Users forum]]. ||Feature|| Support status|| || [[#Sensors|Sensors (temps & fans)]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#Suspend|Suspend & Hibernate]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#Reboot|Reboot]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#Video|Video & Effects (Compiz)]] || {{attachment:IconsPage/ok.png}} || || [[#LCD|LCD Brightness Control]] || {{attachment:IconsPage/ok.png}} || || [[#Fan|Fan Control]] || {{attachment:IconsPage/ok.png}} || || [[#HFS|HFS+]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#CDDVD|CD/DVD Writing]] || {{attachment:IconsPage/ok.png}} || || [[#Bluetooth|Bluetooth]] || {{attachment:IconsPage/ok.png}} || || [[#Keyboard|Keyboard functions (Brightness,volume,...)]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#Touchpad|Touchpad (bcm5974)]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#Wireless|Wireless (AirPort)]] || {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} || || [[#iSight|iSight]] || {{attachment:IconsPage/ok.png}} || || [[#Sound|Sound]] || {{attachment:IconsPage/ok.png}} || || [[#Microphone|Microphone]] || {{attachment:IconsPage/ok.png}} || || [[#ExtMon|External Monitor]] || {{attachment:IconsPage/ok.png}} || || [[#ARC|Apple Remote Control]] || {{attachment:IconsPage/ok.png}} || || [[#Firewire|Firewire]] || {{attachment:IconsPage/ok.png}} || {{attachment:IconsPage/ok.png}} (works out-of-the-box) {{attachment:IconsPage/ok.png}} {{attachment:IconsPage/info.png}} (works, with remarks) {{attachment:IconsPage/warning.png}} (needs manual install) {{attachment:IconsPage/dont.png}} (won't currently work (completely)) {{attachment:IconsPage/question.png}} (not yet documented) == Basic Installation Instructions == Common things about installing and maintaining Ubuntu on Intel-based Macs: [[https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation|Intel CPU-based Macintosh Generic Installation Instructions]] To install: {{{ sudo apt-get install pommed }}} <> == The system memory issue and 32/64bits kernel version == As the MacBookPro 5,3 has 4 GB as base RAM and the Intel C2D processors supports 64 bits, it is recommended to use the 64-bit architecture. === using 32-bit architecture === If for some reason you use the 32-bit architecture, it can detect and use only up to 3.1 GB of RAM so the rest can't be used. As a workaround you can install the "linux-image-generic-pae" kernel package. This kernel adds support for more than 3.1 GB and enables more features for virtualization with Xen. Just install the 32 version of Ubuntu as you would do normally and after that type this at your terminal: {{{ sudo apt-get install linux-image-generic-pae }}} There are situations where this will not install the necessary modules along with the kernel, and lead to your system starting unable to start x11 or access devices such as wireless or sound. If this happens, boot to the previous kernel, and uninstall the PAE kernel. Note that PAE adds (extremely minor) overhead and that even with a PAE kernel, each individual process (or XEN virtual machine) will be limited to 4GB of memory. <> == Sensors (temps & fans) == To enable proper detection of sensors edit /etc/modules: {{{ gksudo gedit /etc/modules }}} Add to this to end of file, save and reboot: {{{ coretemp }}} If you would like to monitor temperature readings and fan speed, install sensors-applet: {{{ sudo apt-get install sensors-applet }}} Reboot and then add the applet to your panel.(Right click on preferences applet and select the most important for you.If not your bar is going to be unusable due to the big quantity of sensors available) Temperature, fanspeed, environmental light and keyboard backlight can be controlled over the sysfs exported interface at /sys/devices/platform/applesmc.768/. It has been reported that [[https://bugs.launchpad.net/mactel-support/+bug/626079|reported]] that the environmental light sensor did not work initially until he applied a not further specified firmware update. NOTE (ASomerville): Light sensor does not work (well) for me. The scaling seems to be incorrect. A bright room registers as 1 or 2 out of 255, and anything else is 0. Result is auto dimming not possible. <> == Suspend & Hibernate == Seems to work fine out of box: multiple suspends during single session works. single hibernation works. (multiple hibernations during single session not tested). NOTE (ASomerville): Upon upgrade, regularly hangs on return from suspend or even just screen off without suspend. == Reboot == Works out of the box. NOTE (Asomerville): Does not work for me. <> == Video & Effects (Compiz) == {{attachment:IconsPage/restricted.png}} You should use the restricted driver: The open source driver nouveau seems to currently causes random system freezes. Install from: System -> Administration -> Additional Drivers. Select the NVidia graphics driver that says recommended and Activate. Reboot to apply the change. Also with the powermizer functionality of the Nvidia driver you can get the laptop pretty cool at about 50 degrees Celsius instead of 65-70 degrees. Battery life is also better at about 4 hours currently (instead of 2:30). Edit your /etc/X11/xorg.conf to permanently operate the Nvidia graphics adapter in the lowest possible setting: {{{ gksu gedit /etc/X11/xorg.conf }}} Add the following lines to the Device section of the nvidia device: {{{ Option "Coolbits" "1" Option "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerLevel=0x3; PowerMizerDefaultAC=0x3" }}} <> == LCD Brightness Control == Works out of the box if pommed is installed. See pommed below. <> == Fan Control == Fan control works out of the box in Precise. <> == HFS+ == * Read Only: Confirmed working out of the box. * Read/Write: It is necessary to disable journal: 1. Login macos and open a terminal. 1. Identify the partition. 1. Run diskutil to disable journaling. {{{ $ mount /dev/disk0s2 on / [...] $ sudo diskutil disableJournal force /dev/disk1s2 Journaling has been disabled for volume [...] on disk0s2 }}} <> == CD/DVD Writing == Both writing and reading work. <> == Bluetooth == Works out of the box. <> == Keyboard Functions == With the new linux kernel the keyboard should work out of the box even if it doesn't have pommed installed, but it requires to uninstall mouseemu, otherwise the MAYUS key led won't work {{{ sudo apt-get remove mouseemu }}} === With pommed installed: === * F1 and F2 can be used to adjust display brightness * F3 and F4 can be correctly associated with any command in the system preferences. * F5 and F6 can be used to adjust keyboard backlight brightness * F7, F8 and F9 are correctly associated with audio player's 'previous', 'play/pause', 'forward' commands. * F10, F11, F12 correctly mute and tune audio volume (after having correctly configured audio, see below) * Eject key works To swap the fn key functionality (e.g. use fn+F1 to dim the LCD etc..), edit /etc/pommed.conf and set the variable fnmode to 2 {{{ gksudo gedit /etc/pommed.conf }}} === Keyboard backlight without pommed === Consider this if you want a way to control the backlight from the command line or with the mouse. You can choose a value from 0 to 255 to tune the keyboard backlight by writing to ''/sys/class/leds/smc::kbd_backlight/brightness''. For example this command switches the light completely on: {{{ echo 255 | sudo tee -a /sys/class/leds/smc::kbd_backlight/brightness }}} The file reporting the ambient light sensor is /sys/devices/platform/applesmc.768/light (the number 768 in the path might be different on your machine). To read the value do {{{ cat /sys/devices/platform/applesmc.768/light }}} which should give different values under different light conditions. With the following method you can control the backlight through a GUI. Create a new file in /usr/local/bin: {{{ gksu gedit /usr/local/bin/keyboard-backlight }}} Copy this script into the file and save it: {{{ #!/bin/bash # A little script to set the keyboard backlight # Note: clicking "Cancel" in the dialog sets the backlight to 0. # Note: needs to be called as root (with gksu or sudo) because # of writing to /sys. Use "sudo visudo" to edit the /etc/sudoers file # if you want to allow non-admin users to change this value, possibly # without having to enter a password. Read "man sudoers" and, e.g., use # ALL ALL = NOPASSWD:/usr/local/bin/keyboard-backlight # to allow all users to execute this command on all hosts without # a password. # Read current value BACKLIGHT=$(cat /sys/class/leds/smc::kbd_backlight/brightness) BACKLIGHT=$(zenity \ --title "Keyboard backlight" \ --scale \ --text="Adjust the keyboard backlight" \ --value="$BACKLIGHT" \ --min-value="0" \ --max-value="255") echo $BACKLIGHT | tee -a /sys/class/leds/smc::kbd_backlight/brightness exit 0 }}} Use this command to make the file executable: {{{ sudo chmod +x /usr/local/bin/keyboard-backlight }}} You may want to create a launcher on the panel. In this case enter {{{ gksu /usr/local/bin/keyboard-backlight }}} as the command line. Very smartly, the dialog will recognise the word "keyboard" and suggest a good launcher icon automatically. You could also use the ambient light value to extend the script to make the backlight depend on the ambient light. <> == Touchpad (bcm5974) == The touchpad works out of the box. You can enable two-finger scrolling from the preference->mouse->touchpad applet. If you are having accidental clicks while moving the mouse, it also may help you to uncheck the "Enable mouse clicks with touchpad" checkbox under the Touchpad tab. Furthermore tweaking the drag and drop time to be less may be help. NOTE: (AndySomerville) Clicking and holding with one finger and dragging may work out of the box. If it doesn't you may need to remove old configuration from `/etc/xorg.conf` back it up and move it out of the way `mv /etc/X11/xorg.conf{,backup.upgrade}` and xorg should start with default values and allow one finger click and drag. <> == Wireless (AirPort) == {{attachment:IconsPage/restricted.png}} The Broadcom driver was not installed by default, you either need to connect your MacBookPro to the internet and allow the installer to download updates while installing. Or use System->Administration->Additional Drivers to install the STA drivers. Sometimes it won't allow you to install the Drivers from "Additional Drivers" (specially with PAE Kernel) So, you will need to install the firmware manually: {{{ sudo apt-get install firmware-b43-installer b43-fwcutter }}} Then, you need to reinstall bcmwl: {{{ sudo apt-get install --reinstall bcmwl-kernel-source }}} == iSight == {{attachment:IconsPage/webcam.png}} Works out of the box == Sound == Internal speakers and headphones work out of box. However, internal speakers are muted. The volume for the front speaker (Front Sp) must be unmuted and turned up. This can be adjusted by running ''alsamixer'' from the Terminal, or using gnome-alsamixer {{{ sudo apt-get install gnome-alsamixer }}} To enable the optical output (you'll see a red light coming from your headphone jack if it is enabled), make sure that the IEC958 option is checked. If optical output is turned on by default, setting the following command as a login item will fix this: {{{ amixer set IEC958 off }}} == Microphone == The microphone works out of the box. <> == External Monitor == Works out of the box. <> == Apple Remote Control == Install gnome-lirc-properties: {{{ sudo apt-get install gnome-lirc-properties }}} gnome-lirc-properties will give you an entry "Infrared Remote Control" in menu System > Administration. After launching this it will guide you through the configuration. Tested with remote model No A1294 (aluminum Apple remote): gnome-lirc-properties detects the signals (with some models the Enter button is detected as an additional Play button). Although this seems to work, the remote does not actually control any applications, like the Totem Movie Player - more testing is required. Could be that the key-binding are incorrect. <> == Firewire == Works out of the box ---- [[https://help.ubuntu.com/community/CategoryMac|CategoryMac]] ---- ||{{attachment:IconsPage/users.png}} Please update this page, if you have figured out anything, that is not mentioned here!|| ||{{attachment:IconsPage/users.png}} The [[http://ubuntuforums.org/group.php?groupid=352|MactelSupportTeam]] is about to restructure and reorganize the documentation for Intel-based Macs. If you are interested in helping, please visit our [[https://wiki.ubuntu.com/MactelSupportTeam|team page]] for information. For all Mactel wikis, there is a starting place [[https://wiki.ubuntu.com/MactelSupportTeam/CommunityHelpPages|here]]. There is also a [[http://ubuntuforums.org/showthread.php?t=969360|thread]] about planning the Mactel docummentation going on. ||