## page was renamed from WifiDocs/Device/WifiDocs/Device/DWL-G122 (Rev C1) Describe WifiDocs/Device/WifiDocs/Device/DWL-G122 (Rev C1) here. To make sure that your usb device is the correct, have a look at the information printed on the device. In my case, the model information reads "{{{Model No.: DWL-G122 H/W Ver.:C1 F/W Ver.:3.00}}}" What's important here is that the hardware version is C1 - earlier models are covered by different drivers. Also note the output of the {{{lsusb}}} command, which, in my case, produces the following line: <> {{{ Bus 003 Device 002: ID 07d1:3c03 D-Link System }}} Check the [[WifiDocs/Driver/RalinkRT73]] page for setup this device.