1. Introduction

(i) This was used in v 5.10 (Breezy Badget) but shouldn't change to much in later releases.

Info <!> Note that there is now a F5D7000 v3 with uses the Ralink RT2500 chipset. For this card, you require the Rt2500WirelessCardsHowTo.

1.1. Find and download driver

(i) What is nice about this .EXE file is that you can actually open it as a .ZIP file and extract its contents to any folder you want. Usually a folder in your home directory called drivers works nicely. Where ever you extract them to, make a note of where you extracted it to. You will need this directory in Step 3. The driver file that makes this all come together nicely and enables your network card should be located in the extracted directory in a folder called AR.

1.2. Install driver file

IconsPage/example.png

1.3. Check for proper install

1.4. Setup to load for boot

http://www.linuxquestions.org/linux/answers/Networking/Belkin_F5D7000_USA_Wireless_Card_in_Linux_Complete_Guide






CategoryHardware CategoryNetworking CategoryWireless

WifiDocs/Device/F5D7000 (last edited 2013-12-14 00:22:49 by knome)