Sometimes, things go wrong, and the system you've carefully installed is no
longer bootable. Perhaps the boot loader configuration broke while trying
out a change, or perhaps a new kernel you installed won't boot, or perhaps
cosmic rays hit your disk and flipped a bit in
/sbin/init. Regardless of the cause, you'll need to
have a system to work from while you fix it, and rescue mode can be useful
There are several options to rescue a broken Ubuntu system on ppc64el:
To access rescue mode, select
rescue from the
boot menu (if available) or append the boot parameter
to the kernel boot entry of the boot loader.
While booting the system enter the boot loader menu:
GNU GRUB version 2.02 *Ubuntu Advanced options for Ubuntu Use the ↑ and ↓ keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting or 'c' for a command-line.
Then type e to edit the boot loader configuration and entries,
navigate to your prefered Linux kernel line and append either
GNU GRUB version 2.02 insmod ext2 set root='hd0,gpt2'or Ubuntu if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,g\ pt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 ea967ae0-7519-11eB-85b\ d-5254008bdef4 else search --no-floppy --fs-uuid --set=root ea967ae0-7519-11e\ 8-85bd-5254008bdef4 fi echo 'Loading Linux 4.15.0-23-generic ...' linux /boot/vmlinuz-4.15.0-23-generic root=UUID=ea96\ 7ae0-7519-11eB-85bd-5254008bdef4 ro maybe-ubiquity rescue Minimum Emacs-like screen editing is supported. TAB lists completions. Press Ctrl-x or F10 to boot, Ctrl-c or F2 for a command-line or ESC to discard edits and return to the GRUB menu.
Then press either Ctrl-x or F10 to boot with the modified entry and the system will enter the rescue mode.
... [ OK ] Started Update UTMP about System Runlevel Changes. You are in rescue mode. After logging in, type "journalctl -xb" to view system logs, "systemctl reboot" to reboot, "systemctl default" or "exit" to boot into default mode. Press Enter for maintenance (or press Control-D to continue): root@ubuntu:~#
Alternatively the installer can be booted with the
rescue=true boot parameter.
You'll be shown the first few screens of the installer, with a note in the
corner of the display to indicate that this is rescue mode, not a full
installation. Don't worry, your system is not about to be overwritten!
Rescue mode simply takes advantage of the hardware detection
facilities available in the installer to ensure that your disks,
network devices, and so on are available to you while repairing your system.
A trivial option is to just boot the standard installation kernel and initrd without any additional kernel parameter, and select from the inital screen theentry.
[!!] Configuring d-i This is the network console for the Debian installer. From here, you may start the Debian installer, or execute an interactive shell. To return to this menu, you will need to log in again. Network console option: Start installer Start installer (expert mode) Start shell
The functionality in the
debian-installer shell is limited, however, it can still act as a rescue system to fix a broken installation.
While not using the rescue mode, be careful to not accidentially repartition or format any disk which may cause data loss.
In either case, after you exit the shell, the system will reboot.
Finally, note that repairing broken systems can be difficult, and this manual does not attempt to go into all the things that might have gone wrong or how to fix them. If you have problems, consult an expert.