Subversion is an open source version control system. Using Subversion, you can record the history of source files and documents. It manages files and directories over time. A tree of files is placed into a central repository. The repository is much like an ordinary file server, except that it remembers every change ever made to files and directories.
To access Subversion repository using the HTTP protocol, you must install and configure a web server. Apache2 is proven to work with Subversion. Please refer to the HTTP subsection in the Apache2 section to install and configure Apache2. To access the Subversion repository using the HTTPS protocol, you must install and configure a digital certificate in your Apache 2 web server. Please refer to the HTTPS subsection in the Apache2 section to install and configure the digital certificate.
To install Subversion, run the following command from a terminal prompt:
sudo apt install subversion apache2 libapache2-svn
This step assumes you have installed above mentioned packages on your system. This section explains how to create a Subversion repository and access the project.
Create Subversion Repository
The Subversion repository can be created using the following command from a terminal prompt:
svnadmin create /path/to/repos/project
Once you create the repository you can import files into the repository. To import a directory, enter the following from a terminal prompt:
svn import /path/to/import/directory file:///path/to/repos/project
Subversion repositories can be accessed (checked out) through many different methods --on local disk, or through various network protocols. A repository location, however, is always a URL. The table describes how different URL schemes map to the available access methods.
direct repository access (on local disk)
Access via WebDAV protocol to Subversion-aware Apache2 web server
Same as http://, but with SSL encryption
Access via custom protocol to an svnserve server
Same as svn://, but through an SSH tunnel
In this section, we will see how to configure Subversion for all these access methods. Here, we cover the basics. For more advanced usage details, refer to the svn book.
Direct repository access (file://)
This is the simplest of all access methods. It does not require any Subversion server process to be running. This access method is used to access Subversion from the same machine. The syntax of the command, entered at a terminal prompt, is as follows:
svn co file:///path/to/repos/project
svn co file://localhost/path/to/repos/project
If you do not specify the hostname, there are three forward slashes (///) -- two for the protocol (file, in this case) plus the leading slash in the path. If you specify the hostname, you must use two forward slashes (//).
The repository permissions depend on filesystem permissions. If the user has read/write permission, he can checkout from and commit to the repository.
Access via WebDAV protocol (http://)
To access the Subversion repository via WebDAV protocol, you must configure your Apache 2 web server. Add the following snippet between the <VirtualHost> and </VirtualHost> elements in /etc/apache2/sites-available/000-default.conf, or another VirtualHost file:
<Location /svn> DAV svn SVNParentPath /path/to/repos AuthType Basic AuthName "Your repository name" AuthUserFile /etc/subversion/passwd Require valid-user </Location>
The above configuration snippet assumes that Subversion repositories are created under /path/to/repos directory using svnadmin command and that the HTTP user has sufficent access rights to the files (see below). They can be accessible using http://hostname/svn/repos_name url.
Changing the apache configuration like the above requires to reload the service with the following command
sudo systemctl reload apache2.service
To import or commit files to your Subversion repository over HTTP, the repository should be owned by the HTTP user. In Ubuntu systems, the HTTP user is www-data. To change the ownership of the repository files enter the following command from terminal prompt:
sudo chown -R www-data:www-data /path/to/repos
By changing the ownership of repository as www-data you will not be able to import or commit files into the repository by running svn import file:/// command as any user other than www-data.
Next, you must create the /etc/subversion/passwd file that will contain user authentication details. To create a file issue the following command at a command prompt (which will create the file and add the first user):
sudo htpasswd -c /etc/subversion/passwd user_name
To add additional users omit the "-c" option as this option replaces the old file. Instead use this form:
sudo htpasswd /etc/subversion/passwd user_name
This command will prompt you to enter the password. Once you enter the password, the user is added. Now, to access the repository you can run the following command:
svn co http://servername/svn
The password is transmitted as plain text. If you are worried about password snooping, you are advised to use SSL encryption. For details, please refer next section.
Access via WebDAV protocol with SSL encryption (https://)
Accessing Subversion repository via WebDAV protocol with SSL encryption (https://) is similar to http:// except that you must install and configure the digital certificate in your Apache2 web server. To use SSL with Subversion add the above Apache2 configuration to /etc/apache2/sites-available/default-ssl.conf. For more information on setting up Apache2 with SSL see HTTPS Configuration.
You can install a digital certificate issued by a signing authority. Alternatively, you can install your own self-signed certificate.
This step assumes you have installed and configured a digital certificate in your Apache 2 web server. Now, to access the Subversion repository, please refer to the above section! The access methods are exactly the same, except the protocol. You must use https:// to access the Subversion repository.
Access via custom protocol (svn://)
Once the Subversion repository is created, you can configure the access control. You can edit the /path/to/repos/project/conf/svnserve.conf file to configure the access control. For example, to set up authentication, you can uncomment the following lines in the configuration file:
# [general] # password-db = passwd
After uncommenting the above lines, you can maintain the user list in the passwd file. So, edit the file passwd in the same directory and add the new user. The syntax is as follows:
username = password
For more details, please refer to the file.
Now, to access Subversion via the svn:// custom protocol, either from the same machine or a different machine, you can run svnserver using svnserve command. The syntax is as follows:
$ svnserve -d --foreground -r /path/to/repos # -d -- daemon mode # --foreground -- run in foreground (useful for debugging) # -r -- root of directory to serve For more usage details, please refer to: $ svnserve --help
Once you run this command, Subversion starts listening on default port (3690). To access the project repository, you must run the following command from a terminal prompt:
svn co svn://hostname/project project --username user_name
Based on server configuration, it prompts for password. Once you are authenticated, it checks out the code from Subversion repository. To synchronize the project repository with the local copy, you can run the update sub-command. The syntax of the command, entered at a terminal prompt, is as follows:
cd project_dir ; svn update
For more details about using each Subversion sub-command, you can refer to the manual. For example, to learn more about the co (checkout) command, please run the following command from a terminal prompt:
svn co help
Access via custom protocol with SSH encryption (svn+ssh://)
The configuration and server process is same as in the svn:// method. For details, please refer to the above section. This step assumes you have followed the above step and started the Subversion server using svnserve command.
It is also assumed that the ssh server is running on that machine and that it is allowing incoming connections. To confirm, please try to login to that machine using ssh. If you can login, everything is perfect. If you cannot login, please address it before continuing further.
The svn+ssh:// protocol is used to access the Subversion repository using SSL encryption. The data transfer is encrypted using this method. To access the project repository (for example with a checkout), you must use the following command syntax:
svn co svn+ssh://ssh_username@hostname/path/to/repos/project
You must use the full path (/path/to/repos/project) to access the Subversion repository using this access method.
Based on server configuration, it prompts for password. You must enter the password you use to login via ssh. Once you are authenticated, it checks out the code from the Subversion repository.