Install Ubuntu Hardy Heron (8.04.1) on the Dell Mini 9
This is a stage one documentation for installing Ubuntu Hardy 8.04.1 onto a Dell Mini 9 PC from a USB CDROM drive. It will be improved and updated over time.
Please help and update this page
Product description
The Dell Inspiron Mini 9 is a netbook set to contend with other low-cost ultra-portables such as the EeePC and Aspire One. Dell's addition to the subnotebook market began shipments on September 16th, 2008 starting at $349.[1] It is built by Compal Electronics, who also make the MSI Wind and the HP mininote 2133. [2]
It features an 8.9 inch WSVGA(1024×600) wide-screen display running on a 1.6 Ghz Intel Atom Diamondville CPU. In the US, it has 512 or 1024MB of RAM, 4, 8, or 16GB of SSD Storage, and it comes with Ubuntu Linux or Windows XP, whilst in the UK it is currently only available with 1024MB of RAM, a 16GB SSD, and Windows XP. For connectivity, the device carries WiFi and 3 USB ports. In the US, an optional 0.3 or 1.3 MP webcam and internal bluetooth is available . In the UK a 1.3 MP webcam comes as standard.[3] The Dell Inspiron Mini 9 is 1-1.22 inches thick and weighs 1.035 kg.
Why 8.04.01 ?
If you try and install the vanilla 8.04 CD, the CD will try to boot, however it will quickly drop out to a Busybox prompt telling you there is a modprobe problem. This doesn't happen on the updated 8.04.1
Special keys
On the Dell Mini 9, you will notice a message at boot time proposing among other options to press F12 for boot options. There is no F12 key on the Mini9, however pressing "0" will have the same result.
Installation
CD Install
The device doesn't come with a CD/DVD drive, so you will need to attach a USB one to the unit, and place your Ubuntu install CD in the drive. To boot from the CD ROM, press 0 during the initial boot screen (where it shows the Inspiron Logo) and choose the CD ROM drive from the drop-down menu.
You can choose either the Try Ubuntu method or the Install Ubuntu method. The OS installs just as you would expect with Ubuntu. If you have never installed Ubuntu, a page with general install instructions can be found at HowtoForge.
When asked, reboot the computer, remove the CD, and unplug the USB Drive.
Known issues
Smaller disk space than expected
(originally posted in this [http://ubuntuforums.org/showpost.php?p=5964118&postcount=253 forum post]
Some Mini 9 systems shipped with Ubuntu pre-installed may report smaller disk space than expected (ie. 4GB instead of 8GB). The "missing" space is on the system, but remains unformatted. However, it can be made available by following this procedure:
Backup your important data, if any, before attempting this. This can't be stressed enough.
Open up a terminal. It's under Applications > Accessorites in the Ubuntu menu.
Type sudo fdisk /dev/sda. You will be asked for your password. This opens up fdisk, which is a disk partition editor.
- Hit "p" to print out your current partition scheme. Write down the start number for the partition /dev/sda2. This number is important. This should be 48196. Yours might be, too, depending on your Mini9 model.
- Now you'll delete your main Linux partition. Don't worry. It doesn't touch your data. Hit the "d" key and select partition 2.
- Create a new partition using the "n" key. This will be a "primary" partition, and will be number 2. Enter the start sector you wrote down earlier. For the end sector, just hit enter, and it will default to the largest size it can manage.
- Use the "a" command to toggle the bootable bit on your new partition.
- Hit the "p" key again and make sure that your new partition exists and is considered to be a "Linux" partition, and that it has the asterisk that indicates that it is bootable.
- If you're confident that you got all of that done correctly, use the "w" command to write your changes to the hard drive. Otherwise, use "q" to exit without making changes.
- Since you just changed the partition table on your root drive, you'll need to reboot for the changes to be seen by the kernel. Do that now. If it boots, you did it right.
Find your way back to a terminal, and type sudo resize2fs /dev/sda2. You will be asked for your password again. Since size wasn't specified, the filesystem will be resized to match the partition size.
- You're done. Type "df -h" to see how much space you have. You don't technically need to reboot, but it is recommended doing so anyway so a quick boot-time check of the filesystem can be run and make sure everything is OK.
Wifi
If you are having issues with wifi or can't seem to have it recognized, make sure your system is fully updated. Disabling the restricted wifi drivers and re-enabling them may be necessary.
Sound Card
The sound card is much easier to get working.
From the command prompt:
sudo nano /etc/modprobe.d/alsa-base
Add this line to the end:
options snd-hda-intel model=dell
- Save the file and exit.
- Reboot the computer.
- Once the computer is booted, double-click on the sound icon in the toolbar.
- Increase the speaker volume.
Other comments
Compiz
Works fine after the updates.
Webcam
Works after all updates applied.
Installing Kubuntu (KDE 4.1)
I've found the KDE 4 interface to be beter with the 1280x600 screen resolution, Gnome is a great interface, but using packages such as Gimp and Evolution don't scale down corectly, so clicking on next and cancel buttons can be a bit of guesswork.
The KDE 4.1 version of Kubuntu can be downloaded from here,
http://www.kubuntu.org/getkubuntu/download
like Ubuntu, we are looking to use the 8.04.1 release of Kubuntu, you will also need to choose the option marked
Kubuntu 8.04 KDE4 Remix - Featuring the cutting edge KDE 4 with community support only
Boot from the CD, and install the complete OS, reboot when the installation is complete.
This part of the install can also be done, with the downloaded ISO, and the information found on Install from USB Stick
However to get the wifi to work, you will need to run
sudo apt-get update sudo apt-get upgrade
Then reboot the PC, alternatively, the Ethernet port should work fine.
Updating the packages
Once rebooted, the default Kubuntu 4.1 install isn't the prettiest one, however we can ensure things are a lot more streamlined, by installing the additional packages from the Launchpad repositories.
Open the Konsole app and enter the command
sudo nano /etc/apt/sources.list
and add the line
deb http://ppa.launchpad.net/kubuntu-members-kde4/ubuntu hardy main
to the nd of the list, save the file, and exit
Update the repostitory
sudo apt-get update
Once the update has complete, you will need to update some packages.
sudo apt-get install kubuntu-kde4-desktop kdeplasma-addons amarok-kde4 and kontact-kde4 kate-kde4 kmail-kde4
I've installed a few extra packages from the norm, the Amarok 2 is still flaky at time of writing, let all these packages install and reboot the PC, the login screen might still look a bit strange, compared to the rest of the layout, which should now have the more up to date backdrop.
Open Konsole again, and type
sudo apt-get update sudo apt-get upgrade
With this done, not only is the interface more streamlined, applications and dialog boxes which would normally open larger than the screen size will become scalable.
Install all the updates, and reboot. You should now have a cleaner looking system, to get the soundard working, followin the above instructions, for fixing the soundcard.
Additional Packages
some additional packages whick you may wish to install, in order to make KDE 4.1 just that little more "appealing" are
*kpowersave - provides a system tray icon displaying remaining power *kscreensaver-kde4 - provides screen savers
Interface changes
GTK-QT
To improve the look of GTK (Gnome) apps, use the gtk-qt-engine-kde4 ackage, which makes the apps look a little more slick.
sudo apt-get install gtk-qt-engine-kde4
FONT SIZES
The default font sizes are very large, and I'd recommend editing the font sizes in the System Settings section, to about 8, keep the fonts however as changing them can make the system look a little strange.e
LANCELOT
If you're not a fan of th new KDE menu, thats ok, its a plasmoid, and cna be change easily, using Lancelot as you've already added the necessary repostory, this can be installed quickly, (From Konsole)
sudo apt-get install plasmoid-lancelot
Then add the new Widget on the Deskbar plasmoid.
Cairo Dock
Cairo-dock is an animated application launch bar for the desktop comparable to Mac OS X's Dock, or Rocket Dock (for those of you who come from Windows).
It is compatible with Compiz-Fusion, Beryl, Compiz, and also Xcompmgr, but it can run without a composite manager (with fake transparency). Cairo-Dock can run under GNOME, KDE, and XFCE.
More information about Cairo-Dock can be found here https://help.ubuntu.com/community/CairoDock
Change the Login Screen back to GDM
Usplash change
KDE 4 will change the USplash (graphical boot and shutdown) theme to Kubuntu. Run these two commands to switch back to the Ubuntu theme, the first will prompt you to select the theme you want:
sudo update-alternatives --config usplash-artwork.so sudo update-initramfs -u
Updates
Use a wired connection to fully update your system. Once this connection is established, install all the required updates and reboot the computer.
External Links
Categories: CategoryNew CategoryCleanup