|
Size: 1219
Comment:
|
Size: 1326
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 7: | Line 7: |
| ||Asus||WL-167G V2||RT2500||???||???||Yes||Yes||Tested in 7.10. Gives errors in dmesg but once I clicked on the nm-applet and selected Manual Configuration, I was able to put in my SSID, etc. Worked for me with a Linksys router running DD-WRT and WPA-TKIP.||2008-01-16||USB|| | ||Asus||WL-167G V2||RT2500||???||???||Yes||Yes||Tested in 7.10. Gives errors in dmesg but once I clicked on the nm-applet and selected Manual Configuration, I was able to put in my SSID, etc. I also had to enter DNS info manually. Then I just had to run ifdown wlan0 && ifup wlan0 and I was online. Worked for me with a Linksys router running DD-WRT and WPA-TKIP.||2008-01-16||USB|| |
Summary
Make |
Model |
Chipset |
Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
Asus |
WL-107G |
rt2500 |
|
? |
No |
Yes |
Card works fine in Breezy with no special setup. Is not detected at install, but if you go to network settings and put ra0 where it says lo it will be detected. Probably have to manually put in the ssid. Broken in Feisty. Works in Gusty. |
2007-12-27 |
PCMCIA |
Asus |
F3JM-AK029P |
Intel PRO/Wireless 3945ABG |
|
? |
Yes |
Yes |
Card works fine in Feisty with no special setup. Detected automatically on install. |
2007-04-24 |
PCMCIA |
Asus |
WL-138G V2 |
Broadcom BCM4318 |
bcm43xx |
Probably Not |
Yes |
Partially |
Driver installed in Feisty, lacks firmware. bcm43xx-fwcutter in repos will fetch the firmware |
2007-07-03 |
PCI |
Asus |
WL-167G V2 |
RT2500 |
??? |
??? |
Yes |
Yes |
Tested in 7.10. Gives errors in dmesg but once I clicked on the nm-applet and selected Manual Configuration, I was able to put in my SSID, etc. I also had to enter DNS info manually. Then I just had to run ifdown wlan0 && ifup wlan0 and I was online. Worked for me with a Linksys router running DD-WRT and WPA-TKIP. |
2008-01-16 |
USB |