Revision 31 as of 2006-10-25 19:53:41

Clear message

Warning /!\ This is a work in progress, this means that I'm on it right now, it is not finished yet and it may breake your system!

Caveat

As you may already have guessed following this instruction may breake your systme and you are on your own to fix it again.

Scenario

This instruction describes how to install Ubuntu on a dedicated server over ssh. I assume that your provider provides you with a rescue system from which you can boot and prepare your system. An online replacement is possible, but it is some more work and a lot more risky if things go bad (the basic idea is to temporarily disable your swap and install a transitional system on it).

Preparing the Hard Disk

Partitioning

Use fdisk to partion your hard disk. 

# fdisk /dev/hda

Remember to set the root partion bootable!

For the rest of this instruction we assume the following partition layout. 

/dev/hda1 (83  Linux)        - for /, 
/dev/hda2 (82  Linux swap)   - as swap

Creating Filesystems

Below is how we get our / populated with ext3. 

# mke2fs -j /dev/hda1

And the same for our swap partion. 

# mkswap /dev/hda2
# sync; sync; sync
# swapon /dev/hda2

The Base System

Mountig Root

# mkdir /mnt/ubuntu
# mount -t ext3 /dev/hda1 /mnt/ubuntu

Getting debootstrap

Debootstrap is a collection of scripts that we will use in the next step to set up a base system. We need an appropriate version of debootstrap from http://archive.ubuntu.com/ubuntu/pool/main/d/debootstrap/ to make this work.

Make sure that binutils is installed on your system.

On an apt based system we can use dpkg to install it. 

# wget http://archive.ubuntu.com/ubuntu/pool/main/d/debootstrap/debootstrap_0.3.3.0ubuntu2_all.deb
# dpkg -i debootstrap_0.3.3.0ubuntu2_all.deb

If your current system is rpm based, use alien to install it or find a rpm on the web (http://azhrarn.underhanded.org/debootstrap-0.2.23-1.i386.rpm).

Installing the Base System

# /usr/sbin/debootstrap --arch i386 dapper /mnt/ubuntu http://archive.ubuntu.com/ubuntu

(arch may be different for you, e.g. md64, hppa, ia64, powerpc, or sparc)

Basic Configuration

Set the Hostname

Change HOSTNAME to whatever suits your environment. 

# echo HOSTNAME > /mnt/ubuntu/etc/hostname

fstab

# vim /mnt/ubuntu/etc/fstab

Put the following in fstab: 

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hda1       /               ext3    defaults,errors=remount-ro 0       1
/dev/hda2       none            swap    sw              0       0

Networking

Make sure to use your network details instead. 

## /mnt/ubuntu/etc/network/interfaces

#Network Config:
# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eth0
iface eth0 inet static
        address 10.0.0.10
        network 10.0.0.0
        braodcast 10.0.0.255
        gateway 10.0.0.1
        netmask 255.255.255.0

Make sure to use your hostnaem and domain. 

## /mnt/ubuntu/etc/hosts
127.0.0.1   localhost
127.0.0.1   hostname.domain.tld hostname

You need a valid resolv.conf with at least one valid nameserver, e.g.: 

## /mnt/ubuntu/etc/resolv.conf
nameserver 10.0.0.1

Enter the new environment

Before we chroot into the new environment we need to mount /proc and /dev 

mount -t proc none /mnt/ubuntu/proc
mount -o bind /dev /mnt/ubuntu/dev
LANG= chroot /mnt/ubuntu /bin/bash

Change the root password

I is just bad if you forget this, so just .... 

# passwd

Create a user and switch shadow password on

# dpkg-reconfigure --default-priority passwd

Installing Packages

# apt-get update

Installing OpenSSH Server

# apt-get install openssh-server

Install a Kernel

Choose the right kernel for your architecture. I go with: 

# apt-get install linux-image-686

Installing GRUB

The boot loader is most important, so do: 

apt-get install grub
mkdir /boot/grub
cp /lib/grub/i386-pc/* /boot/grub
vim /boot/grub/grub.conf

# /boot/grub/grub.conf
default 0
timeout 3

title=Ubuntu
  root (hd0,0)
  kernel /vmlinuz root=/dev/hda1
  initrd /initrd.img

ln -s /boot/grub/grub.conf /boot/grub/menu.lst

# grub

grub> root (hd0,0)
grub> setup (hd0)
grub> quit

Reboot

# exit
# cd /

# umount /mnt/ubuntu/proc
# umount /mnt/ubuntu/dev
# umount /mnt/ubuntu
# reboot

Finishing

After th reboot ssh in again.

===Generate locales=== 

# locale-gen en_US.UTF-8
# echo 'LANG="en_US.UTF-8"' >> /etc/environment
# echo 'LANGUAGE="en_US:en"' >> /etc/environment

=== 

apt-get install ubuntu-standard

References