|
Size: 4040
Comment: add cat doc
|
Size: 4016
Comment:
|
| Deletions are marked like this. | Additions are marked like this. |
| Line 3: | Line 3: |
| I'm creating this wiki page trying to help people that want to install an IRC Server with Services(Nickserv,Chanserv and Memoserv) .There will be a list of some good servers softwares like bahamut or ircd-hybrid with an HOWTO for the installation of the server itself and services related to it, also ill make a related wiki with some informations about Irc commands that can be used both client and server side.(i'll do examples using ircd-hybrid as server software). | I'm creating this wiki page trying to help people that want to install an IRC Server with Services(Nickserv,Chanserv and Memoserv) .There will be a list of some good servers softwares like bahamut or ircd-hybrid with an HOWTO for the installation of the server itself and services related to it, also ill make a related wiki with some informations about IRC commands that can be used both client and server side.(I'll do examples using ircd-hybrid as server software). |
| Line 8: | Line 8: |
| || austhex7.5.p11||http://bahamut.dal.net/|| || Bahamut 1.8.3||http://bahamut.dal.net/|| || dancer-ircd 1.0||http://www.doc.ic.ac.uk/~aps100/dancer/|| || DreamForge 4.6.7||http://www.dal.net|| || IRCd 2.10.3p3||http://www.irc.org/|| || IRCd 2.10.10||http://ircu.sourceforge.net/|| || TR-IRCD 5.7.3||http://tr-ircd.sourceforge.net/|| || UltimateIRCd 3.0.0||http://www.shadow-realm.org/|| || Unreal 3.2.4||http://www.unrealircd.com/|| |
|| [[http://bahamut.dal.net/|austhex]] || [[http://bahamut.dal.net/|Bahamut ]]|| || [[http://www.doc.ic.ac.uk/~aps100/dancer/|dancer-ircd]] || [[http://www.dal.net|DreamForge]] || || [[http://ircu.sourceforge.net/|IRCd]] || [[http://tr-ircd.sourceforge.net/|TR-IRCD]] || || [[http://ngircd.barton.de|ngIRCd]] || || || [[http://www.shadow-realm.org/|UltimateIRCd]] || [[http://www.unrealircd.com/|Unreal]]|| |
| Line 25: | Line 21: |
| I think that i dont need to explain the first way, so lets view the second one. First download the software at this site ,then compile it using these commands: |
To install using the first method please take a look at [[https://help.ubuntu.com/community/SoftwareManagement|Installing Software]]. For the second method please read on; First download the software from [[http://ircd-hybrid.com/|this site]], then compile it using these commands: |
| Line 34: | Line 32: |
| '''Note''': Remember to edit the ircd.conf file to personalize your server settings | '''Note''': Remember to edit the ircd.conf file to personalize your servers settings. |
| Line 36: | Line 34: |
| After you have done these steps without getting errors ,you will be able to join your brand new server using of course your favourite Irc Client. To enter inside just open a new server tab and write this : | Given you complete these steps error free, you will be able to join your brand new server using your favorite [[InternetRelayChat]] Client. To join your server you would typically enter the following command; |
| Line 40: | Line 38: |
| This was the easier part of this wiki page, now we can go on with services, there are a lot of different services software ,here it is a list of them: | This was the easier part of this wiki page, now we can go on with installing services, there are a lot of different services software, here it is a list of some available: |
| Line 42: | Line 40: |
| || Anope 1.7.14 ||http://www.anope.org/|| || Anope 1.7.14 MySQL||http://www.anope.org/|| || Auspice 2.8 Beta ||http://www.inmean.com/default.asp|| || Epona 1.4.14 ||http://www.epona.org/|| || Epona 1.4.14 diff ||http://www.epona.org/|| || Hybserv2 1.9.2 ||http://www.hybserv.net/|| || IRC Defender 1.3.6 ||http://ircdefender.sourceforge.net|| || IRC Services 4.5.40 ||http://www.ircservices.esper.net/|| || NeoStats 2.5.3 ||http://www.neostats.net/|| || srvx 1.1.2 ||http://srvx.sourceforge.net/|| |
|| [[http://www.anope.org/|Anope]] || [[http://www.anope.org/|Anope with MySQL]]|| || [[http://www.inmean.com|Auspice]] || [[http://www.epona.org/|Epona]]|| || [[http://www.hybserv.net|Hybserv]] || [[http://ircdefender.sourceforge.net|IRC Defender]] || || [[http://www.ircservices.esper.net/|Esper IRC Services]] || [[http://www.neostats.net/|NeoStats]] || || [[http://srvx.sourceforge.net/|srvx]] || || |
| Line 53: | Line 46: |
| == How to install Ircd services(I'll use epona services for this example) == | |
| Line 55: | Line 47: |
| Before thinking of how you can connect the services to the server , we have to say something before. Now you only have to download and compile the source like we have done above.(./configure - make && make install). After you have finished with this first part we can start editing the file services.conf that will store informations regarding the server where services have to be connected. Inside that file you will have to fill all things that arent yet filled, adding some informations about the password that will be used later for the connection, or the server address and much more. But in this page ,ill explain what you have to do inside the ircd.conf file to link services to the server. Thats not hard ,just copy and paste this lines |
== Installing Services == '''Note''': In this example we will use Epona. Before making your IRC server public it would be a good idea to install some network services for maintenance of the network. NickServ, ChanServ and MemoServ are services that you may be familiar with from other networks. Download the source from the Epona website and use the above method to compile them (as you did with the IRCd). Once you have completed that you '''will''' need to edit your services.conf which is used for information for the Services. Inside that file you will have to fill all things that aren't yet filled in, take a look over and add some details to customize your network. If you want to take the simple option paste the following lines ''replacing your information''. |
| Line 79: | Line 77: |
| If you have done a good work ,services will be connected after few minutes to the server ,if not you will find insde log folder ,the log regarding errors found at startup. | If there are no errors the services should connect to the network a couple of minutes later. If not you will need to look at the logs to find out what is wrong. |
| Line 81: | Line 79: |
| Thats all. Users and Operators commands wiki page available soon. | |
| Line 83: | Line 80: |
| CategoryDocumentation | Thats all for now. Users and Operators commands wiki page available soon. ---- CategorySoftware |
What this wiki will talk about?
I'm creating this wiki page trying to help people that want to install an IRC Server with Services(Nickserv,Chanserv and Memoserv) .There will be a list of some good servers softwares like bahamut or ircd-hybrid with an HOWTO for the installation of the server itself and services related to it, also ill make a related wiki with some informations about IRC commands that can be used both client and server side.(I'll do examples using ircd-hybrid as server software).
Available Server Software
How to install ircd-hybrid
There are two ways to install this software ,all of them are really easy :
- Using synaptic with searching the word ircd-hybrid
- Downloading the source and installing it
To install using the first method please take a look at Installing Software. For the second method please read on;
First download the software from this site, then compile it using these commands:
tar zxvf filename.tar.gz cd /path/to/source ./configure make && make install
Note: Remember to edit the ircd.conf file to personalize your servers settings.
Given you complete these steps error free, you will be able to join your brand new server using your favorite InternetRelayChat Client. To join your server you would typically enter the following command;
/server 127.0.0.1
This was the easier part of this wiki page, now we can go on with installing services, there are a lot of different services software, here it is a list of some available:
Installing Services
Note: In this example we will use Epona.
Before making your IRC server public it would be a good idea to install some network services for maintenance of the network. NickServ, ChanServ and MemoServ are services that you may be familiar with from other networks.
Download the source from the Epona website and use the above method to compile them (as you did with the IRCd). Once you have completed that you will need to edit your services.conf which is used for information for the Services.
Inside that file you will have to fill all things that aren't yet filled in, take a look over and add some details to customize your network. If you want to take the simple option paste the following lines replacing your information.
Y:27:180:0:0:4000000 C:127.0.0.1:YourPwd:Services.LocalHost.Net::30 N:127.0.0.1:Yourpwd:Services.LocalHost.Net::30 U:Services.LocalHost.Net:*:* H:*::Services.LocalHost.Net
Note: Services.LocalHost.Net is the services name used in the services.conf file
In the password space you will have to put the same password used in services.conf file.
Now just start up services using this command inside services folder :
./services
If there are no errors the services should connect to the network a couple of minutes later. If not you will need to look at the logs to find out what is wrong.
Thats all for now. Users and Operators commands wiki page available soon.