Size: 36882
Comment:
|
Size: 37086
Comment:
|
Deletions are marked like this. | Additions are marked like this. |
Line 181: | Line 181: |
|| TRENDnet || TEW-504UB || ndiswrapper + net5523.inf || No || No || No || works well in Breezy with ndiswrapper (the one provided in synaptic), with the drivers provided on the CD ||2006-10-14||USB || |
ContentsBRTableOfContents |
Wireless Network Interfaces
Please put in exact model numbers where possible.
To determine what wireless card/chipset you have, open up a terminal and type the following.
lspci -v | less
Then, scroll to find your wireless device and note down its details. For USB devices, type lsusb instead.
Wireless support varies with architecture. For example, ndiswrapper will work on the x86 architechture. A list of card that work with ndiswrapper is available at http://ndiswrapper.sourceforge.net/mediawiki/index.php/List .
If you are going wireless card shopping, please look at this searchable list of cards which are supported under Linux at http://linux-wless.passys.nl/ . Make sure you buy wireless cards supported fully under Linux. It is worth noting that the [https://www.fsf.org/resources/hw/net/wireless/cards.html Free Software Foundation recommends the Ralink 2500/RT2400 and Realtek RTL8180 chipsets].
If you find that your device is supported by a driver included with Ubuntu, but the driver is not loaded automatically, please see ReportingBugs to file a bug with Ubuntu! These are easy to fix.
Other Ubuntu wiki pages on Wireless Networking:
[wiki:WifiDocs Central page for Wifi info]
WifiDocs/WirelessTroubleShootingGuide (work in progress)
PCI, miniPCI, cardbus or inbuilt
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
3com |
3CRWE154A72 |
ndiswrapper |
No |
No |
No |
Use instructions from Ubuntu Wiki. Active scanning network manager causes connection drop. |
15/11/2005 |
PCMCIA |
||
3com |
3CRWE154G72 |
prism54 |
Yes?(since Hoary) |
Yes |
Yes |
Painless ! The only bad point is that the driver doesn't support signal strenght detection. Not a big deal anyway |
21/08/2005 |
PCMCIA |
||
3com |
3CRSHPW196 |
atmel |
Yes? |
Yes |
Yes? |
Get the atmel wireless drivers from synaptic (atmelwlandriver-source) if you are having problems. The card has been buggy in the past, but appears to work well now. The retractable Xjack antenna makes it worth having! |
|
|
||
Accton |
EN-1216 |
Broadcom |
No |
No |
No |
needs ndiswrapper |
2005-12-20 |
|
||
Acer |
Aspire 5021WLMi / 5020 |
Broadcom |
No |
No |
Looks like yes |
Instructions for Ubuntu 64 bits at: ["WifiDocs/Acer5021WLMi_Amd64"] |
2005-11-06 |
|
||
Acer |
IPN2220 |
ndiswrapper + neti2220.inf |
No |
No |
No |
Works with ndiswrapper. |
2005-04-15 |
|
||
Adaptec |
AWN-8030 |
prism2_cs |
No |
No |
No |
Method should work for other prism2 based pcmcia cards: ["WifiDocs/WlanngHoary"] |
2005-04-26 |
|
||
Airlink |
AWLH4030 |
Atheros |
No |
Yes |
Yes |
Works out of the box in Breezy via the madwifi linux-restricted-kernel that is included by default. No tweaking required. |
2005-9-29 |
|
||
AtlantisLand |
A02-WP-54G |
Atheros |
Yes |
Yes |
Yes |
Works out of the box in Breezy via the madwifi. No tweaking required. |
2005-12-6 |
|
||
Asus |
WL-107G |
rt2500 |
? |
No |
Yes |
Card works fine in Breezy with no special setup. Is not detected at install, but if you go to network settings and put ra0 where it says lo it will be detected. Probably have to manually put in the ssid. This card is recommended because of GPL drivers which are quickly advancing and will soon be in the official kernel. |
2006-05-21 |
PCMCIA |
||
Belkin |
F5D6001 |
Prism2/2.5/3 |
? |
Yes |
Yes |
Works out of the box in Ubuntu 6.06 (Dapper Drake) |
2006-06-20 |
PCI |
||
Belkin |
F5D6020 |
atmel_cs |
No |
No |
No |
Requires the atmel-firmware package |
|
PCMCIA |
||
Belkin |
F5D6020 version 2 |
atmel_cs |
? |
Yes |
Yes |
Just works on Hoary, Warty requires simple workaround (bug [https://launchpad.net/distros/ubuntu/+source/pcmcia-cs/+bug/12005 12005]). DOES NOT WORK ON DAPPER, or anything with a kernel later than 2.6.12. |
2006-08-07 |
PCMCIA |
||
Belkin |
F5D6020 Ver .3002uk |
Ndiswrapper + edited version of Bel6020.inf with rtl8180.sys |
no |
no |
no |
Works well, eventually! Edited file Bel6020.inf to change every reference of Bel6020.sys to rtl8180.sys. |
2006-03-08 |
PCMCIA |
||
Belkin |
F5D7000 |
ndsiwrapper + bcmw15a.inf |
no |
no |
no |
See Belkin F5D7011ef. Have to manually set frequency to that of your router using sudo iwconfig <wlan0> channel <channel>. To find your router's frequency use iwlist <wlan0> scan. bcmw15a.inf can be found as part of R74092us.exe |
2005-12-16 |
PCI |
||
Belkin |
[http://catalog.belkin.com/IWCatProductPage.process?Product_Id=136479 F5D7000 v3] |
rt2500 |
? |
Yes |
Yes |
Work out of the box with WEP and Breezy. WPA support is easy using ["WifiDocs/Driver/RalinkRT2500"]. NB Does not support SMP kernels http://bugzilla.ubuntu.com/show_bug.cgi?id=21485 |
2006-01-26 |
PCI |
||
Belkin |
F5D7010 |
rt2500 |
? |
Yes |
Yes |
This card will actually work out of the box with Breezy. For Hoary/Warty use the instructions at ["WifiDocs/Driver/RalinkRT2500"] to install a driver. |
2005-06-22 |
PCMCIA |
||
Belkin |
F5D7010 |
Broadcom 4318 |
Yes |
Yes |
No |
Recognized by Dapper, but must use bcm43xx-fwcutter to get the firmware. http://bcm43xx.berlios.de/ . Also ["WifiDocs/Driver/bcm43xx"] |
2006-08-30 |
PCMCIA |
||
Belkin |
F5D7010 rev03 ver4000 |
Broadcom 4306 / ndiswrapper + bcmwl5.inf |
No |
No |
No |
Need to install ndiswrapper-utils and your windows driver. In Hoary you also need to change value of radiostate from 1 to 0. New - As an alternative, see Linksys WPC54GS with SpeedBoost below. |
2006-3-16 |
PCMCIA |
||
Belkin |
F5D7010 ver5100 |
Atheros AR5211 / ndiswrapper + BLKWGN.inf |
No |
No |
No |
Need ndiswapper-utils and the Windows driver (BLKWGN.inf). Works with WPA and WPA2. Tested in Dapper. |
2006-10-02 |
PCMCIA |
||
Belkin |
F5D7011 |
ndiswrapper + BCMWL5.INF (from CD-ROM) |
? |
No |
No |
Followed [http://czarism.com/easy-peasy-wireless-w-ubuntu-debian-linux these instructions] and it worked. Only tried with no encryption so far |
2006-05-05 |
PCMCIA |
||
Belkin |
F5D7011ef |
ndiswrapper + bcmwl5a.inf |
? |
No |
No |
It is recognized by Ubuntu as Broadcom Corporation BCM4306 80211b/g Wireless Lan Controler. See Truemobile 1350 below |
|
PCMCIA |
||
Belkin |
F5U222et |
? |
? |
Yes |
Yes |
Tested on Ubuntu 5.04 "The Hoary Hedgehog" |
2005-08-21 |
PCMCIA |
||
Belkin |
FSD6001_Ver3 |
Realtek 8180 |
No |
No |
No |
Used on Breezy Badger, using Ndiswrapper, but took some tweaking, see [http://ndiswrapper.sourceforge.net/mediawiki/index.php/List Ndiswrapper Wiki] |
21/04/06 |
PCI |
||
Blitzz |
BWP712 |
Atheros |
? |
Yes |
Yes |
Tested on Ubuntu 5.04 "The Hoary Hedgehog" |
2005-10-05 |
|||
Broadcom |
BCM4306 |
ndiswrapper + bcmwl5a.inf |
No |
No |
No |
see Truemobile 1350 below |
|
|
||
Broadcom |
BCM4306 (rev 02) |
bcm43xx + wl_apsta.o |
No |
No |
No |
barely works; [http://ubuntuforums.org/showpost.php?p=1189151&postcount=332 instructions] for hp pavillion ze4400 laptop |
6/28/06 |
internal |
||
Buffalo |
WLI-CB-G54L |
acx111 |
No |
Yes |
No |
Copy FwRad16.bin from driver CD in to /lib/hotplug/firmware and remove all other firmwares from that directory. Note that filename is case sensitive. |
2005-08-22 |
PCMCIA |
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
Cisco |
Aironet CB21AG |
ath* (madwifi) |
? |
Yes |
Yes |
Tested on Hoary. See also CB21AGHowto |
2005-07-20 |
Cardbus |
||
Cisco |
Aironet 4800,35x |
airo_cs |
Yes |
Yes |
Yes |
Make sure latest firmware is installed. |
|
PCMCIA |
||
Cisco |
Aironet 350 Series |
airo, airo_cs |
? |
Yes |
Yes |
|
|
PCMCIA and MPCI |
||
Conceptronic |
C54RC |
rt2500 |
? |
Yes |
No |
Tested on Hoary, see ["WifiDocs/Driver/RalinkRT2500"] |
2005-04-15 |
|
||
Conceptronic |
C54RC |
rt2500 |
? |
Yes |
Yes |
Tested on Breezy, on a nearly fresh installed system. Worked like a charm, without any problem. |
2005-10-23 |
|
||
Conceptronic |
C54RC |
rt61 |
No |
No |
No |
This is sold as C54RC, but as a "version 2.0" sticker at the backside. Working with instructions from http://www.ubuntuforums.org/archive/index.php/t-132980.html |
2006-03-28 |
|
||
Conceptronic |
C54C |
Atheros |
? |
Yes |
No |
|
|
|
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
Dell |
DW1390 - Wireless 1390 - WLAN (802.11g) ExpressCard |
Broadcom |
|
|
No |
Requires ndiswrapper. Use instructions in [http://ndiswrapper.sourceforge.net/wiki/index.php/InstallationNdiswrapper ndiswrapper wiki]. Used the driver from the WindowsXP driver from the [http://support.dell.com/support/downloads/download.aspx?c=us&cs=04&l=en&s=bsd&releaseid=R115321&SystemID=INSPIRON%20B120&os=WW1&osl=en&deviceid=11410&devlib=0&typecnt=1&vercnt=3&formatcnt=1&fileid=152055 Dell driver download page]. Unzipped the .EXE file, and found the driver in DRIVER directory. I also compiled and installed the latest version of ndiswrapper, per [http://ubuntuforums.org/showthread.php?t=104539 instructions]. Not sure if this is necessary. Also, this driver did not work until I ran ndiswrapper by calling it with it's entire path from the terminal. I tried twice installing the driver by calling simply ndiswrapper but it did not work. I checked the path of the command ($ which ndiswrapper) and it said /usr/sbin/ndiswrapper. $ /usr/sbin/ndiswrapper Perhaps it was coincidence that it just happened to cooperate with me just as I decided to call it using its full path? Not sure. |
2006-03-21 |
MiniPCI |
||
Dell |
Truemobile 1150 |
orinoco_cs |
Yes |
Yes |
Yes |
|
|
|
||
Dell |
Truemobile 1180 |
ndiswrapper |
No |
No |
No |
see Truemobile 1350 below |
|
|
||
Dell |
Truemobile 1300 |
ndiswrapper + bcmwl5a.inf |
No |
No |
No |
see Truemobile 1350 below |
|
|
||
Dell |
Truemobile 1350 |
ndiswrapper + bcmwl5a.inf |
No |
No |
No |
[http://ndiswrapper.sourceforge.net/wiki/index.php/InstallationNdiswrapper instructions] [http://ndiswrapper.sourceforge.net/wiki/index.php?Distributions "Debian" instructions] [http://ndiswrapper.sourceforge.net/wiki/index.php/List Driver list] |
|
|
||
Dell |
Wireless 1370 802.11bg |
Broadcom 4318 |
? |
No |
No |
Ships with Celeron model Inspiron 1300. Tried ndiswrapper and firmware methods linked http://ubuntuforums.org/showthread.php?p=1071920&mode=linear. lspci reports: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02). Card starts up but cannot find any way to connect to network with dapper |
2006-03-21 |
MiniPCI |
||
Dexlan |
30221 |
orinoco_cs |
? |
Yes |
Yes |
? |
|
|
||
D-Link |
DWL-650 |
orinoco_cs |
Yes |
Yes |
Yes |
Automatically detected, setup even asks for the WEP key |
|
|
||
D-Link |
DWL-G630 |
? |
?? |
Yes |
Yes, though CD-installer doesn't recognize it |
Works in Breezy (just configure it from the gnome network config tool), though it isn't recognized durring installation. Works only via ndiswrapper in Warty and Hoary. |
|
|
||
D-Link |
DWL-G630 H/W Ver.:C2 F/W Ver.:3.01 |
Atheros/madwifi |
? |
Yes |
? |
driver in linux-restricted-modules |
20-Dec-2005 |
PCMCIA |
||
D-Link |
DWL-G630 H/W Ver.:E1 F/W Ver.:5.0 |
RT61 / Ralink provided |
No |
No |
No |
Revision E1 has changed chipset from rev. D. Chipset manufacturer has driver source at http://www.ralinktech.com/supp-1.htm (Look for "RT61", D-Link product name is not mentioned). Driver sources are GPL, but attached firmware files apparently carry no explicit license. |
04-Jan-2006 |
PCMCIA |
||
D-Link |
DWL-G510 |
Atheros |
? |
Yes |
Yes |
revision B1 4.10 -- revision C2 should work if you download and compile the RT61 drivers for Linux from http://www.ralinktech.com/supp-1.htm but they are hard to compile. |
|
PCI |
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
D-Link |
DWL-520 E1 |
prism2 |
No |
No |
No |
See ["WifiDocs/Device/DWL-520vE1"] |
2005-04-25 |
|
||
D-Link |
DWL-G520 |
Atheros AR5212 |
Yes |
Yes |
Yes |
DAPPER: Nearly works out-of-the-box, but had to add "wireless-rate 11M" to /etc/network/interfaces + reboot or two. BREEZY: Works out of the box with breezy. Works well, even with WEP. (Note: Some G520 may use acx100 instead.) HOARY: Rev. B of this card will not work out-of-the-box with Hoary--the madwifi drivers that shipped with Hoary are too old. An updated linux-restricted-modules* package is available [http://ubuntupc.com/ubuntu/public-sources/linux-restricted-modules-2.6.10-5-386_2.6.10.5-1gb_i386.deb here] Note that this package is not officially supported. Some users have reported problems with WPA in the forums. |
2005-12-16 |
PCI |
||
D-Link |
DWL-G520+ |
acx111 |
Yes |
Yes |
Yes |
Works fine together with AirPort Express, using 128 bit WEP. |
2006-03-11 |
PCI |
||
D-Link |
DWL-G520+A |
ralink |
? |
No |
No |
lspci shows "RaLink: Unknown device 0302". Dapper already has the required driver rt61, but needs some manual configuration. Refer to [http://www.ubuntuforums.org/showthread.php?t=132980 this forum post] |
2006-10-08 |
PCI |
||
D-Link |
DWL-520+ |
acx100 |
Yes |
Yes |
Yes |
Just Works, only distro that autodetects this one |
|
|
||
D-Link |
DWL-650+ |
acx100 |
Yes |
Yes |
Yes |
Automatically detected, works with and without WEP. Did not test 22Mb/sec mode |
|
|
||
D-Link |
DWL-G650 |
Atheros AR5212 / ath_hal |
?? |
Yes |
Yes |
Only Open-Key WEP with Netgear DG834G |
|
|
||
D-Link |
DWL-G650 |
Atheros AR5212, Version C2, Firmware 3.1.6 / ath_pci, ath_hal |
Should work (Card is recognized and kernel drivers loaded, so connecting to a unsecure Open System A.P. while installing should work) |
Yes |
Yes |
Open System Access Point and WEP work out of the box. For WPA-PSK I needed to install wpasupplicant (not included in Ubuntu). I used the Debian Sid package without any problem. This card also works with ndiswrapper. I used a D-Link DI-624+ router to test it. (upgraded firmware of the router, not related to linux nor the wifi card, router rebooted itself even when connecting a windows machine with a ethernet cable, applied last firmware, now doing fine) |
|
|
||
D-Link |
DWL-G650+ |
acx100 |
No |
No |
No |
Does not work for me unless I recompile the pci_acx module with latest patches. After that it works. WEP not yet supported for acx111 cards. Added_note: I confirm this card does not work with a default Hoary install: despite the fact that it worked fine with my Hoary install from Array 5. Go figure. The fault seems to be related to an error in loading the firmware which is present in the hotplug firmware folder. |
|
|
||
D-Link |
DWL-G650+ |
ndiswrapper +gplus.inf (xp) |
No |
Yes |
No |
Works with WEP. It is out-of-the box as much as ndiswrapper can be (manually install of win drivers). However, it shows 100% range all the time |
|
|
||
D-Link |
DWL-G650+ |
acx100 |
No |
No |
No |
Work quite well with latest driver from Davis Vlasenko. (0.3.10 work well, but some earlier version may work also). |
2005-09-22 |
PCMCIA |
||
D-Link |
WNA-2330 |
Atheros AR5212 v: A1 |
? |
Yes |
Yes |
Worked immediately. No config necessary. MadWifi driver automatically recognized it and NetworkManager worked with no troubles. Believe this is a replacement for the dwl-g650 |
2006-07-23 |
PCMCIA/Cardbus |
||
Edimax |
EW-7106PC |
niswrapper -i NET8180.INF |
No |
No |
No |
Work with WEP |
|
|
||
Edimax |
EW-7128g |
rt2500 |
No |
No |
No |
Works with WEP and WPA. See ["WifiDocs/Driver/RalinkRT2500"] |
|
|
||
Edimax |
EW-7128g |
RT61 |
No |
No |
No |
This seems to be another version of this card! Tested on Breezy and Dapper Flight 6. Breezy: must compile source code from Ralink website, and perform a few other steps. I will write a howto of my method. Dapper: as yet (Flight 6 version), the card is recognised and driver loaded, but doesn't seem to work as cannot connect to router. |
2006-04-06 |
PCI |
|
|
Gigabyte Technology |
GN-WPKG |
rt2500 |
? |
? |
Yes |
FSF recommended, GPL drivers, works automatically in breezy. Highly recommended. |
PCI |
|
|
|
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
HP |
Pavilion zv5000 |
Broadcom Corporation BCM4303 802.11b Wireless LAN Controller (rev 02) |
No |
No |
No |
Card works well with windows driver (from CD) and ndiswrapper. See http://www.ubuntuforums.org/showthread.php?t=25683 |
2006-07-17 |
internal |
||
HP |
WL220 PCI |
acx100 |
Yes |
Yes |
Yes |
I don't bring it to work on an running Hoary System. After a new Install of Warty it works out of the box, Installation asks for ESSID and WEP-Key. Works great. |
|
|
||
Hawking |
HWC54D |
rt2500 |
No |
No |
No |
Needs driver added in Warty, see http://www.ralinktech.com/supp-1.htm |
2005-10-04 |
PCMCIA |
||
Hawking |
HWC54D |
rt2500 |
??? |
YES |
YES |
Only Tested on Breezy Preview. |
2005-10-04 |
PCMCIA |
||
Hawking |
HWC54D |
rt2500 |
??? |
YES |
YES |
Works out of the box in Dapper - easy! |
2006-05-29 |
PCMCIA |
||
Hawking |
HWC54G Rev T |
acx111? ndiswrapper TNET1130.INF works |
No |
Yes |
No |
Copy FwRad16.bin from driver CD in to /lib/hotplug/firmware and remove all other firmwares from that directory. Note that filename is case sensitive. |
9/06/2005 |
cardbus |
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
Intel |
Pro/Wireless 3945 ABG (Centrino) |
ipw3945 |
Untested |
Yes |
Yes |
Works perfectly on a fresh Ubuntu 6.06 (Dapper) installation. On older versions, works if you manually install the ipw3945 module (from ipw3945.sf.net), the ipw3945 daemon and the ipw3945 firmware ucode (requires ieee80211 kernel support). |
2006-Oct-07 |
|
||
Intel |
PRO/Wireless 2100 (Centrino) |
ipw2100 |
Yes? |
Yes |
Yes |
Automatically detected since the first installation steps |
2005-12-09 |
MPCI |
||
Intel |
PRO/Wireless 2200 (Centrino) |
ipw2200 |
Yes* |
Yes* |
Yes* |
Automatically detected since the first installation steps. [http://nickselby.com/articles/technology/index.htm?a=1807 Driver Upgrade How-To] [http://ubuntuforums.org/showthread.php?t=26623 WPA How-To] |
2005-12-09 |
MPCI |
||
Intel |
Wireless 802.11b MiniPCI Adapter |
orinoco_pci |
?? |
Yes |
Yes |
Automatically detected in ThinkPad X30 |
|
MPCI |
||
KCorp |
KLG-520 |
Atheros AR5212 |
? |
Yes |
Yes |
Detected in Network Settings as ath0 and started working once the WAP details were input |
|
|
||
Linksys |
WMP54G (Ver.4) |
Ralink |
? |
Yes |
Yes |
Detected in Network Settings as ra0 and started working after WAP details were input |
2005-10-17 |
PCI |
||
Linksys |
WPC 11 (Ver.2.5) |
orinoco_cs |
No |
Yes |
No |
run "cardctl ident" and add info to /etc/pcmcia/config under wireless network adapters section. Be sure to include manfid and bind to orinoco_cs. Then just reboot and run "gksudo network-admin" in console and configure eth0...works like a champ! |
|
|
||
Linksys |
WPC 11 (Ver.3) |
Prism/Intersil |
Yes |
Yes |
Yes |
Detected in Network Settings as eth0 and started working after WAP details were input |
2005-08-15 |
PCMCIA |
||
Linksys |
WPC 11 (Ver.4) |
Realtek |
? |
Yes |
No |
Works great. Use XP driver here here: http://www.realtek.com.tw/downloads/downloads1-3.aspx?Keyword=8180 |
2005-11-04 |
PCMCIA |
||
Linksys |
WPC54AG |
AR5212 802.11abg NIC (rev 01) |
? |
Yes |
No |
Ran apt-get update and card was found. Using WPA-PSK with distro's madwifi drivers connecting to Dlink di-624 version 3 |
2006-09-19 |
PCMCIA |
||
Linksys |
WPC54G (ver 1.2) |
Broadcom (BCM4306 rev3) |
? |
Yes (after fix) |
No |
Get recognized in the setup process, but unable to use it. After setup completes, the card is shown in the network interfaces (as eth0, all hardware details are shown too), but the system is unable to activate it. Updating the firmwares (read how at http://bcm43xx.spugna.org/index.php?topic=29.0) fixes the problem |
2006-03-14 |
PCMCIA |
||
Linksys |
WPC54G (Ver.2) |
Texas Instruments ACX111 |
? |
Yes (with windows drivers and ndiswrapper) |
No |
Follow this howto to get the card to work: http://www.ubuntuforums.org/showthread.php?t=201633 |
2006-6-22 |
PCMCIA |
||
Linksys |
WPC54G (Ver.4) |
? with ndiswrapper |
? |
Yes (with windows drivers and ndiswrapper) |
Yes (with windows drivers and ndiswrapper) |
This card type is very tricky to get working, must have drivers for the SPECIFIC version of the card. |
2005-12-27 |
PCMCIA |
||
Linksys |
WPC54GS with Speedboost |
Broadcom (BCM4306 rev3) |
? |
No |
No |
Card works well with windows driver (from CD) and ndiswrapper - the instructions on [http://www.kosmaczewski.net/blogs/tech/archives/2006/02/how_to_install_1.php] were simple and effective. The instructions also worked for my Belkin F5D7010 card (rev3, listed above) without alteration. |
2006-03-16 |
PCMCIA |
||
Linksys |
WPC54G v3 |
Broadcom(?) with ndiswrapper |
? |
Yes (with windows driver from cd) |
Yes (with windows driver from cd) |
Couldn't get any of the windows drivers from linksys.com to work (they don't have a version 3 one listed right now) but I tried the driver off the installation cd with ndiswrapper and it worked like a charm! Just follow normal ndiswraper driver installation with the NT driver from the linksys install cd that comes with the card (built in driver works flawlessly with the 2.6.15 kernel, ndiswrapper not needed. Do not know if it will work for install.) |
07-05-2006 |
PCMCIA |
||
Linksys |
WPC54G v7.1 |
Atheros |
? |
? |
Yes |
It just works (Dapper Drake 6.06) |
28-09-2006 |
PCMCIA |
||
Longshine |
LCS-8531 G2 |
acx111? |
No |
No |
No |
worked the first time i booted with hoary array 6 live CD, but then datarate slowed down, and never came up anymore, even not after multiple reboots and anything |
2005-03-05 |
|
||
MSI |
MP54G2 |
rt2500 |
? |
yes |
yes |
Works out of the box with Breezy. See also ["WifiDocs/Driver/RalinkRT2500"] |
|
|
||
MSI |
MP54G4 |
rt2500 |
? |
yes |
yes |
Works out of the box with Dapper. Untested on Breezy. |
2006-04-11 |
MPCI |
||
MSI |
PC54G3 |
rt61 |
No |
yes |
No |
Working with instructions from BRhttp://www.ubuntuforums.org/archive/index.php/t-132980.html. WEP, WPA, WPA2 without any problems with Dapper. No ndiswrapper and/or wpa_supplicant necessary. |
2006-08-18 |
PCI |
||
Netcomm |
NP542 |
Texas Instruments ACX 111 |
? |
? |
Yes |
Worked out of the box with Hoary provided WEP is not used. If you want WEP, it works fine with ndiswrapper. |
|
|
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
Netgear |
WG311v2 |
Texas Instruments ACX 111 |
? |
Yes |
Yes |
Worked out of the box with Breezy. WEP now works 100%! |
|
|
||
Netgear |
WG311T |
Atheros AR5212 |
No |
Yes |
Yes |
Detected in Network Settings as ath0 and started working once the WAP details were input. Version WG311TGE (sold as WG311T) works out of the box on Dapper 6.06. |
|
|
||
Netgear |
WG511 |
Prism |
Yes |
Yes |
Yes |
v1 Taiwan works out of the box with Hoary |
2005-04-23 |
PCMCIA |
||
Netgear |
WG511 v2 |
Prism |
? |
Yes |
No |
[http://ubuntuforums.org/showthread.php?t=76804 howto] "Made in China" version. Must use ndiswrapper and a few tweaks - Substitute the v3 drivers in the howto for the Win2000 drivers off the netgear cd. |
2006-02-13 |
PCMCIA |
||
Netgear |
WG511 v3 |
Prism |
? |
Yes |
No |
[http://ubuntuforums.org/showthread.php?t=76804 howto] "Made in China" version. Must use ndiswrapper and a few tweaks. |
2005-10-15 |
PCMCIA |
||
Netgear |
WG511T |
Atheros Super-G |
Yes |
Yes |
Yes |
Has been reported to work out of the box, but a large number of users have had problems. See this [http://ubuntuforums.org/showthread.php?t=38972&page=1&pp=10 HowTo] for further details |
2005-11-16 |
PCMCIA |
||
Netgear |
MA401 |
prism1? |
? |
Yes |
Yes? |
Didn't seem to work at first did: apt-get install pcmcia-cs wireless-tools dhcpcd but said no to removing ubuntu packages and then it worked? |
|
|
||
Netgear |
MA401RA |
orinoco or hostap |
? |
Yes |
No - Need some tweaks |
Be careful, this card is not the same as the Netgear MA401 (without RA) which uses the prism driver. The MA401RA use the orinoco or the hostap drivers. To avoid a complete freeze of the system when the card is inserted, you may have to include a line "exclude=irq3" in /etc/pcmcia/config.opts. Once done, everything works well. In Dapper, if you want to use (k)networkmanager, you may want to use the hostap driver instead of the orinoco one. See this thread: http://www.ubuntuforums.org/showthread.php?t=169222&highlight=knetworkmanager |
03-May-2006 |
PCMCIA |
||
Netgear |
MA311 (PCI) |
Prism 2.5 |
Yes |
Yes |
Yes |
Detected as eth0 and started working after modules.conf was edited (wlan0 to eth0) |
|
|
||
Netgear |
MA521 |
Realtek 8180 |
? |
No |
No |
Success with ndiswrapper and win2000 driver under breezy |
2005-11-30 |
PCI |
||
Netgear |
MA521 |
Realtek / netma521.inf / out-of-the-box (Dapper) |
? |
Yes (Dapper) |
For WEP, probably yes (Dapper) |
Works with ndiswrapper in hoary. Briefly worked in breezy, lots of problems. Used successfully in Dapper with native driver (configured in the standard Dapper kernel) and WPA 1, but could not get it to work with NetworkManager. |
2005-10-17 |
PCMCIA |
||
Netgear |
WPN311 |
Atheros 5212 |
? |
Yes |
Yes |
Detected as ath0, network manager configures it fine |
2006-01-04 |
PCI |
||
Proxim/ Orinoco |
pci a/b/g gold |
Atheros/madwifi |
no |
yes |
Yes |
"just works(tm)" |
|
|
||
Proxim/ Orinoco |
pci a/b/g gold |
Atheros/madwifi |
no |
yes |
Yes |
"just works(tm)" |
|
|
||
Sitecom |
WL-112 |
- |
No |
Yes |
Yes |
Works fine in Dapper, had to use ndisrapper before that |
2006-07-02 |
PCMCI |
||
SMC |
SMC2835W V2 |
prism54 |
No |
Yes |
Yes |
The V2 part is important! |
|
|
||
SMC |
SMC2632W V2 |
atmel_cs |
No |
No |
Yes* |
The V2 part is important! (see bug [http://bugzilla.ubuntu.com/show_bug.cgi?id=2313 2312] for details on enabling it) |
|
|
||
SMC |
SMCWCB-G |
ath_pci/ath_hal |
? |
Yes |
No |
Run 'update-pciids' otherwise the card will not be recognized |
2006-1-1 |
PCMCIA |
||
SMC |
SMCWPCI-G |
ath_pci/ath_hal |
? |
Yes |
Yes |
|
|
|
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
Topcom |
Skyracer Pro PC Card 3054 |
Atheros/Madwifi |
? |
Yes |
Yes |
automaticly detected and set up as ath0, if the card is inserted after a boot you have to run 'sudo ifconfig ath0 up' or activate it through network settings to start the card. booting with the card inserted its started automaticly |
2005-11-02 |
PCMCIA |
||
Topcom |
Skyr@cer wifi card 4054G |
Maverick |
? |
Yes |
Yes |
No Linux driver, but not difficult to install (only tested on Ubuntu 5.10): Use ndiswrapper with the mrv8335.inf file from the Drivers/win98 folder on the setup CD. Does in some cases not support 128-bit encryption, but did work with 64-bit. More info: http://www.oreillynet.com/pub/wlg/6917 |
2006-01-11 |
PCMCIA |
||
Toshiba |
L20-268 |
Atheros |
? |
? |
Yes |
Auto detected and perfectly configured by Ubuntu 6.06 |
2006-06-22 |
on-board |
||
TRENDnet |
TEW-221PC |
adm8211 |
? |
? |
No |
No WEP; Detected only after manual intervention (not on boot) |
|
|
||
TRENDnet |
TEW-423PI |
ndiswrapper |
? |
Yes |
No |
Build ndiswrapper as described on this page, ["WifiDocs/Driver/Ndiswrapper"], and it'll work as long as you follow the directions exactly. |
2005/10/23 |
PCI |
||
TRENDnet |
TEW-443PI |
Atheros AR5212/ath* |
? |
Yes |
yes |
Easiest wireless setup I have ever done, Use Ubuntu's network GUI and just add WEP key, enable and activate. Works with both 802.11b&g. |
2005/11/19 |
PCI |
||
Trust |
Speedshare Turbo Pro |
Atheros AR5212 |
? |
Yes |
Yes |
Detected in Network Settings as ath0 and started working once the WAP details were input |
|
|
||
U.S.Robotics |
WIreless Turbo Pc Card 5410 |
acx111 |
Yes (colony 3) |
Yes |
Yes |
Works great |
2005-09-01 |
PCMCIA |
||
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
||
Zonet |
ZEW1501 |
rt2500 |
? |
Yes |
Yes |
This card does not want to hotplug, so you have to plug it in and restart the computer, and then activate in network settings |
2006-01-01 |
PCMCIA |
||
Zonet |
ZEW1601 |
rt2500 |
No |
Yes |
No |
See ["WifiDocs/Driver/RalinkRT2500"]. Find reference to Zonet on that page for additional information. |
2005-10-21 |
PCI |
||
Zyxel |
ZyAir B-220 |
Zydas |
No |
No |
No |
Compiling driver problems - see [http://linux-lc100020.sourceforge.net/ here] |
2005-03-26 |
|
||
Various |
Various |
Atheros/madwifi |
No |
Yes |
No |
|
|
|
||
Various |
Various PCI devices |
Atmel AT76c50x |
No |
Yes |
No |
|
|
|
Wireless USB Adapters
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
A-Link |
WLAN54MB |
zd1211 |
Yes? |
Yes |
Yes |
Seems to work fine on Breezy |
2005-11-14 |
USB |
ADDON |
ADD-GWU180 |
zd1211 |
? |
Yes |
Yes |
Works fine on Dapper RC1 |
2006-05-28 |
USB |
AVM GmbH |
Fritz!WLAN USB Stick |
TNETW1450 / fwlanusb |
No |
No |
No |
See ["WifiDocs/Device/Fritz!WLAN_USB_Stick"] for details, works with Breezy & Dapper |
2006-03-25 |
USB |
Buffalo |
WLI-USB-L11G |
orinoco_usb |
No |
No |
No |
Follow instructions on ["WifiDocs/Device/BuffaloWLIL11GUSB"] |
2005-09-06 |
USB |
Dell |
Truemobile 1180 Wireless USB Adapter |
prism2_usb? |
? |
? |
? |
|
2006/06/06 |
USB |
Dell |
Wireless 1450 Wireless USB Adapter |
- |
No |
No |
No |
Tested on Hoary |
|
USB |
D-Link |
DWL-122 |
prism2_usb |
No |
No |
No |
Needs linux-wlan-ng and manual configuration. See ["WifiDocs/Device/DWL-122"] |
2005-11-14 |
USB |
D-Link |
DWL-G122 |
A2/prism |
No |
Yes |
No |
USB stick - works well in Breezy with ndiswrapper (the one provided in synaptic), with the drivers provided on the CD |
15/Oct/2005 |
|
D-Link |
DWL-G122 |
B1/ralink |
No |
No |
No |
There are quite a different number of versions floating around, and this one is D-link DWL-G122 REV H/W ver B1 F/W 2.02. The usb id is 2001:3c00. The drivers are from the [http://www.ralinktech.com/drivers/Linux/RT25USB-SRC-V2.0.4.0.tar.gz Ralink]. |
11/25/2005 |
usb |
D-Link |
DWL-G122 |
B1/ralink |
No |
No |
No |
Used the drivers specified above. Can connect to unencrypted wireless networks but with minimal stability, and cannot use WEP/WPA. Not recommended |
1/19/2006 |
usb |
D-Link |
DWL-G122/B1 |
rt2500 / rt2570 |
Yes/No |
Yes/No |
No |
Works well with WEP and WPA on Breezy & Dapper see ["WifiDocs/Device/DWL-G122 (Rev B)"] |
2006-03-25 |
USB |
D-Link |
DWL-G122/C1 |
rt73 / Ralink rt73 |
No |
No |
No |
With the CVS GPL drivers open, WEP and WPA seems to be working. See ["WifiDocs/Driver/RalinkRT73"] |
2006-10-09 |
USB |
D-Link |
DWL-650 P1 |
prism2_usb |
No |
No |
No |
[http://home.columbus.rr.com/andrewbarr/linux/dwl520e1.html Howto] |
|
|
Hawking |
HWL-2 |
Zydas 1211 |
No |
No |
No |
use driver at http://www.zydas.com.tw/downloads/download-1211.asp |
2005-10-04 |
USB |
Make |
Model |
Chipset/ Driver |
Supports network install? |
Supported in installed system? |
Works "out of the box" |
Comments |
Last Updated |
Type |
Linksys |
WUSB54G (Ver.1) |
ndiswrapper |
No |
Yes |
No |
First remove islsm_usb then remove and add back ndiswrapper |
2006/9/1 |
USB |
Linksys |
WUSB54G (Ver.4) |
rt2500 |
? |
Yes |
Yes |
Works fine with WEP on 6.06/Breezy when installed, but hung at activating using LiveCD |
2006-06-28 |
USB |
Linksys |
WUSB11B Ver.2 |
? |
Unknown/Likely |
Yes |
Yes |
No command-line needed, works perfect the first try. Tested on Dapper Beta 2 |
2006/05/09 |
USB |
Linksys |
WUSB11 Ver.2.8 |
? |
? |
Yes |
Yes |
Just choose wireless network in networking, and works. Xubuntu 6.06. |
2006/07/15 |
USB |
Netgear |
MA111v1 |
prism2_usb |
? |
Yes |
Yes |
Works with ndiswrapper and netma111.inf driver. See ["WifiDocs/Device/NetgearMA111"] |
2005-10-09 |
|
Netgear |
WG111v1 |
ndiswrapper + netwg111.inf |
No |
No |
No |
Works with ndiswrapper and the CDROM provided by netgear. See ["WifiDocs/Device/NetgearWG111"] |
2005/09/09 |
|
Compaq |
W200 |
orinoco_usb |
No |
No |
No |
Following WifiDocs/Device/CompaqW200 WEP works, not tried WPA |
2005-01-25 |
|
Sweex |
LW143 |
ndiswrapper + wlanuig.inf |
No |
No |
No |
Works after using ndiswrapper, at systemboot very long delay on Initialising Network interfaces, system hangs after undetermined period of use. |
||
TRENDnet |
TEW-504UB |
ndiswrapper + net5523.inf |
No |
No |
No |
works well in Breezy with ndiswrapper (the one provided in synaptic), with the drivers provided on the CD |
2006-10-14 |
USB |
U.S.Robotics |
802.11g Wireless USB Adapter 5420 |
use lsusb in the terminal and check for ID = 0baf:0111 |
? |
? |
No |
The latest ndiswrapper release source must be downloaded from [http://sourceforge.net/projects/ndiswrapper/] and the directions for building ["WifiDocs/Driver/Ndiswrapper"] followed while replacing ndiswrapper-1.1 with the version downloaded (i.e. latest at time of writing = ndiswrapper-1.5); everything works except the signal strength monitor, probably because it gets compiled against version 17 of the wireless extensions instead of 18; lastly, you'll probably need to install gcc3.4 using Synaptic otherwise build will fail |
2005-11-01 |
USB |
Zonet |
ZEW2501 |
Zydas |
No |
No |
No |
Instructions for building and installing module here http://zd1211.ath.cx/ |
2005-11-16 |
USB |
Zyxel |
AG-225H |
Zydas |
No |
No |
No |
Getting info from http://zd1211.ath.cx/ and waiting for Zydas 2.3 driver included //UPDATE on 2006-02-10, successfully installed with r52 and r52plus-2.4.0.0-1.patch from zd1211.ath.cx site(need to add vendor and product id to zdusb.c) |
2006-01-15 |
USB |
Various (SMC, Belkin...) |
Various USB devices |
Atmel AT76C503A |
? |
Yes |
Yes |
Plug it and go the the network administration to enable it. Nothing more, it works fairly well |
2005-09-27 |
USB |
Note: Have a look at this page, my new version of this on with a cleaner layout: ["WifiDocs/WirelessCardsByVersion"]
CategoryHardware CategoryNetworking CategoryDocumentation CategoryHardware CategoryHardware