Cingular Bluetooth dial-up networking

This information complements the more generic BluetoothDialup guide.

TIMEOUT 35
ECHO    ON
ABORT   '\nBUSY\r'
ABORT   '\nERROR\r'
ABORT   '\nNO ANSWER\r'
ABORT   '\nNO CARRIER\r'
ABORT   '\nNO DIALTONE\r'
ABORT   '\nRINGING\r\n\r\nRINGING\r'
''      \rAT
OK      'AT+CGDCONT=1,"IP","WAP.CINGULAR"'
OK      ATD*99***1#
CONNECT ""
  • The file might make a connection which doesn't allow ping. Modify your "default" configuration made via pppconfig to connect using the USB cable. Adjust the username and passwords as needed for your plan.

# This optionfile was generated by pppconfig 2.3.10.
#
#
hide-password
noauth
connect "/usr/sbin/chat -v -f /etc/chatscripts/provider"
debug
/dev/rfcomm0 115200
defaultroute
noipdefault
user "WAP@CINGULARGRPS.COM"
remotename provider
ipparam provider

usepeerdns
  • /etc/chatscript/BluetoothDialup looks like this:

# This chatfile was generated by pppconfig 2.3.10.
# Please do not delete any of the comments.  Pppconfig needs them.
#
# ispauth PAP
# abortstring
ABORT BUSY ABORT 'NO CARRIER' ABORT VOICE ABORT 'NO DIALTONE' ABORT 'NO DIAL TONE' ABORT 'NO ANSWER' ABORT DELAYED
# modeminit
'' ATZ
# ispnumber
OK-AT-OK "ATDT*99***1#"
# ispconnect
CONNECT \d\c
# prelogin

# ispname
# isppassword
# postlogin
  • Finally, add this to the /etc/ppp/pap-secrets file:

"WAP@CINGULARGPRS.COM" BluetoothDialup "CINGULAR1"


CategoryBluetooth

BluetoothDialup/Cingular (last edited 2011-04-08 10:17:21 by k.dejong)