Verizon Bluetooth dial-up networking
This information complements the more generic BluetoothDialup guide.
EVDO Configuration
This has been tested and worked on the EVDO network but not on the 1xRTT net. (See the 1x configuration below)
This file is /etc/chatscripts/verizon:
# abortstring ABORT 'NO CARRIER' ABORT 'ERROR' ABORT 'NO DIALTONE' ABORT 'BUSY' ABORT 'NO ANSWER' # modeminit '' ATZ # ispnumber OK-AT-OKL3 ATDT#777 # ispconnect CONNECT \d\c
The corresponding /etc/ppp/peers/verizon file looks like this (replace the XXX with your phone #):
hide-password /dev/rfcomm0 connect "/usr/sbin/chat -v -f /etc/chatscripts/verizon" noauth defaultroute usepeerdns connect-delay 10000 user "XXX-XXX-XXXX@vzw3g.com" lock lcp-echo-failure 4 lcp-echo-interval 65535 115200
1xRTT Configuration
The following configuration has been tested and worked on the 1xRTT but not EVDO.
This file is /etc/ppp/peers/1x:
hide-password /dev/rfcomm0 connect "/usr/sbin/chat -v -f /etc/chatscripts/1x" noauth defaultroute usepeerdns connect-delay 10000 user "qnc" password "qnc" lcp-echo-failure 4 lcp-echo-interval 65535s 115200
This file is /etc/chatscripts/1x:
# abortstring ABORT 'NO CARRIER' ABORT 'ERROR' ABORT 'NO DIALTONE' ABORT 'BUSY' ABORT 'NO ANSWER' # modeminit '' AT$QCMDR=2 # ispnumber OK-AT-OKL3 ATDT#777 # ispconnect CONNECT \d\c