Verizon Bluetooth dial-up networking

This information complements the more generic BluetoothDialup guide.

EVDO Configuration

This has been tested and worked on the EVDO network but not on the 1xRTT net. (See the 1x configuration below)

This file is /etc/chatscripts/verizon:

# abortstring
ABORT 'NO CARRIER' ABORT 'ERROR' ABORT 'NO DIALTONE' ABORT 'BUSY' ABORT 'NO ANSWER'
# modeminit
'' ATZ
# ispnumber
OK-AT-OKL3 ATDT#777
# ispconnect
CONNECT \d\c

The corresponding /etc/ppp/peers/verizon file looks like this (replace the XXX with your phone #):

hide-password
/dev/rfcomm0
connect "/usr/sbin/chat -v -f /etc/chatscripts/verizon"
noauth
defaultroute
usepeerdns
connect-delay 10000
user "XXX-XXX-XXXX@vzw3g.com"
lock
lcp-echo-failure 4
lcp-echo-interval 65535

115200

1xRTT Configuration

The following configuration has been tested and worked on the 1xRTT but not EVDO.

This file is /etc/ppp/peers/1x:

hide-password
/dev/rfcomm0
connect "/usr/sbin/chat -v -f /etc/chatscripts/1x"
noauth
defaultroute
usepeerdns
connect-delay 10000
user "qnc"
password "qnc"
lcp-echo-failure 4
lcp-echo-interval 65535s
115200

This file is /etc/chatscripts/1x:

# abortstring
ABORT 'NO CARRIER' ABORT 'ERROR' ABORT 'NO DIALTONE' ABORT 'BUSY' ABORT 'NO ANSWER'
# modeminit
'' AT$QCMDR=2 
# ispnumber
OK-AT-OKL3 ATDT#777
# ispconnect
CONNECT \d\c


CategoryBluetooth

BluetoothDialup/Verizon (last edited 2011-04-08 10:21:00 by D9784B24)