Parent page: Internet and Networking
Dynamic DNS Introduction
Every computer attached to the Internet has an IP address. Name Translation is the process of relating a name (like 'www.google.com') to an IP address (like '188.8.131.52') so that a website (or other service) on a computer can be accessed using an easily remembered name, rather than the IP address number of the computer. Name Translation is implemented via a distributed database known as the Domain Name System.
This database is implemented on the Internet by DNS name servers which keep track of DNS records and exchange this information between each other to maintain consistency. Every request for a name (ie. a web browser) is then directed to one of these name servers.
Most servers on the Internet have a fixed (static) IP address that never changes. The DNS record for this node will only change infrequently.
However, many home users are assigned an IP address that changes more frequently. These dynamic IP addresses are assigned by an ISP. This makes it a challenge to translate a Name to one of these IP addresses.
A number of DNS name servers offer a method to update the DNS database with dynamic IP name translations. This is accomplished by using a small software utility on their computer or a local router.
These Dynamic DNS services allow the user to choose a hostname and set an initial IP address to correspond to that hostname. The software utility then periodically checks for a change to the computer's IP address, and when a new IP address is discovered, it updates the Dynamic DNS database to reflect that change.
Registering with a Dynamic DNS provider
DNS requires that a name server somewhere on the Internet keep track of 'where you are' (i.e. your current IP address). That is, its database must always be updated to make sure your hostname always corresponds to your current IP address.
Upon registering, you will select a username and password, as well as a hostname that you will use as the DNS name (to allow external access to your machine using the hostname).
Many Dynamic DNS providers offer a selection of hostnames available for free use with their service. However, with a paid plan, any hostname (including your own registered domain name) can be used.
Setting up Dynamic DNS service updates
Once you have chosen a Dynamic DNS service provider, you need to set up a way that your IP address record will be updated whenever it is changed. There are two ways of doing this:
- using a dynamic DNS software utility that is installed on your computer
- using the built-in capabilities of a cable/DSL modem/router
Many router/modems support Dynamic DNS reporting/notification/updating directly. If your router's configuration is accessible from a web browser, try accessing it by logging into the local IP address of your router (for example, http://10.1.1.1/ or http://192.168.0.1/ ) and look for the Dynamic DNS (DDNS) settings.
However, even if your modem/router does support dynamic DNS reporting, there are cases in which you may wish to use a software utility on your computer to perform the updates anyway:
- you are using several Dynamic DNS services at once (most routers only accommodate one service at a time)
- the router does not support your particular Dynamic DNS service
- your server is on a mobile computer (e.g. laptop) which is not always connected to the same network/router/modem.
Using a software utility to perform Dynamic DNS Updates
There are several available utilities. Each Dynamic DNS service may work better with a particular utility. (You may need to add the Ubuntu Universe to your set of software repositories to install some of these utilities. See InstallingSoftware.)
ddclient is the original Linux utility for dynamic DNS updates. The ddclient wiki lists some configurations for several Dynamic DNS services. More info can be found on the ddclient forums. The following section has been adapted from Ubuntuguide.org Dynamic IP servers.
- Install ddclient using a software package manager, or using the command-line interface:
sudo apt-get install ddclient
If this is the first time you have installed ddclient, you will be prompted by the installation script for the hostname(s) that you registered with DynDNS (or other Dynamic DNS service). You will also be prompted for the username/password your registered with your Dynamic DNS service. Lastly, you will be asked which ethernet port you primarily use to connect to the Internet (eth0 for wired or wlan0 for wireless, usually). Most of the time this is all you will need to do for the utility to function correctly.
You can also later edit the ddclient configuration file, however, to suit your specific needs (or if you make changes to your service, hostname, or other variables).
- Edit the ddclient configuration file (using kate instead of nano in Kubuntu, or gedit instead of nano in Ubuntu):
sudo nano /etc/ddclient.conf
- To set the number of seconds between updates, I add the line
My dynamic IP only changes rarely, so I only check it hourly (3600 seconds in an hour).
- To use secure SSL communications, I add the line
- To use the DynDNS checkip service (which will autodetect your current IP address), I add the line
use=web, web=checkip.dyndns.com/, web-skip='IP Address'
My configuration file now looks like:
# Configuration file for ddclient generated by debconf # # /etc/ddclient.conf # # Check the current IP address. Either check the eth0 port for its current IP address (can't be used on a LAN), # or use the DynDNS IP checking service. daemon=3600 pid=/var/run/ddclient.pid #use=if, if=eth0 use=web, web=checkip.dyndns.com/, web-skip='IP Address' # # Login and change the values at the DynDNS site, using SSL. protocol=dyndns2 ssl=yes server=members.dyndns.org login=myDynDNSusername password='myDynDNSuserpassword' mysite_1.dynds.org,mysite_2.dyndns.org,mysite_3.dyndns.org
Note: if this doesn't work, try changing web-skip to 'Current Address'
Note that the password must be enclosed in quotation marks, e.g 'myDynDNSuserpassword' for DynDNS.
To use ddclient with Dynu free dynamic DNS service, the configuration file is as followed:
# ddclient configuration for Dynu # # /etc/ddclient.conf daemon=60 # Check every 60 seconds. syslog=yes # Log update msgs to syslog. mail=root # Mail all msgs to root. mail-failure=root # Mail failed update msgs to root. pid=/var/run/ddclient.pid # Record PID in file. use=web, web=checkip.dynu.com/, web-skip='IP Address' # Get ip from server. server=api.dynu.com # IP update server. protocol=dyndns2 login=myusername # Your username. password=YOURPASSWORD # Password or MD5 of password. MYDOMAIN.DYNU.COM # List one or more hostnames one on each line. MYDOMAIN.COM
Note: refer to this setup page for more information about updating subdomains.
- Ensure that the configuration is working:
sudo ddclient -daemon=0 -debug -verbose -noquiet
- Note that you can add additional services and/or domain names to be updated simply by adding an additional block to the configuration file (appropriate for the service). Here is an example (see below for references to additional examples).
protocol=otherDDNSservice server=whatever.ddnsservice.org login=MyOtherDDNSserviceusername password=MyOtherDDNSservicepassword mysite4.dnsservice.org, mysite5.dnsservice.org
The following details a troubleshooting method used to repair a ddclient setup.
- Remove/purge all of the previous install attempts:
sudo apt-get remove --purge ddclient
Install ssh & ssh socket so that you can send your password via ssh instead of in the clear:
sudo apt-get install ssh libio-socket-ssl-perl
Note: ssh w/ddclient won't work without libio-socket-ssl-perl, so make sure that you install that even if you have ssh already installed.
- Reinstall a current ddclient package from the repositories:
sudo apt-get install ddclient
At the prompts enter the appropriate values, for example:
Dynamic DNS service provider: www.dyndns.com
DynDNS fully qualified domain names: your-hostname.dyndns.org
Username for dynamic DNS service: your-username
Password for dynamic DNS service: your-password
Interface used for dynamic DNS service: web
- Modify the /etc/ddclient.conf to send the password using ssh and to properly check for the IP address:
sudo gedit /etc/ddclient.conf
Add entries for "daemon", "ssl" and replace "use=if, if=web" with "use=web" to match the following example:
# Configuration file for ddclient generated by debconf # # /etc/ddclient.conf daemon=300 pid=/var/run/ddclient.pid ssl=yes use=web, web=checkip.dyndns.com/, web-skip='IP Address' login=your-username password=your-password protocol=dyndns2 server=members.dyndns.org your-hostname.dyndns.org
Reference for secure updates: https://www.dyndns.com/support/kb/using_ddclient_with_dyndns_services.html
Now ddclient is set to run as a daemon. Because you had other ddclient configs previously, check:
sudo gedit /etc/default/ddclient
Check to make sure it contains the following lines:
run_ipup="false" run_daemon="true" daemon_interval="300"
Note: you can set the interval shorter or longer, but if you do, also reset your /etc/ddclient.conf to match. https://bugs.launchpad.net/ubuntu/+source/ddclient/+bug/152875
Now, just to be sure everything sticks I generally reboot at this point, then check the status afterward:
sudo /etc/init.d/ddclient status
You should see:
Status of Dynamic DNS service update utility: ddclient is running
However, that may not always catch problems in the ddclient.conf file, so issue:
sudo /etc/init.d/ddclient restart
if you do not get an error similar to the following you probably are good to go:
WARNING: file /etc/ddclient.conf, line x
Then I obtain a new IP address/lease from my service provider (shutting off the modem, having my router request a new lease, whatever) & monitor https://www.dyndns.com/account/services/hosts/ to see if the change actually makes it to dyndns. Also monitor /var/log/syslog to watch the changes there as well.
Also note that there is a password length limitation.
Not very well tested, but passwords >=64 characters in length seem to fail. If you have a fairly long password, try changing it something shorter temporarily (try 8 characters) to see if that's the problem.
Running ddclient with cron
Cron is the automatic task scheduler for Linux systems. Although ddclient runs as a daemon, for various reasons I have found it necessary to force an update at least once a day. This can be done as a daily scheduled task, using cron.
- Edit the crontab with administrative (root) privileges:
sudo crontab -e
- Add the line:
45 04 * * * /usr/sbin/ddclient --force
Now-IP with Curl
Updating from Ubuntu is easy using just curl and Now-IP
curl -u <email>:<password> "https://now-ip.com/update?hostname=<hostname>"
Namecheap & Python
You can update with namecheap and python with the following script. Use your prefered editor and create the file /home/USERNAME/update_dns
# -*- coding: utf-8 -*- import urllib2 urllib2.urlopen("http://dynamicdns.park-your-domain.com/update?host=%s&domain=%s&password=%s" % ("@", "YOURDOMAIN", "YOURPASSWORD"))
Enter into the terminal
and add the following line
* */1 * * * python /home/USERNAME/update_dns
This will update every hour.
This is another Dynamic DNS reporting client. Install the noip2 package from a software package manager, or from the command-line interface:
sudo apt-get install noip2
- Run no-ip and follow the installation prompts:
sudo no-ip -C Please enter the login/email string for no-ip.com: <your_login> Please enter the password for user 'your_login': <your_password> Please enter an update interval: <interval time in minutes> Do you wish to run something at successful update?[N] <N>
- Start the no-ip client
Install the inadyn package using a software package manager, or from the command-line interface:
sudo apt-get install inadyn
- Edit the file /etc/inadyn.conf:
sudo gedit /etc/inadyn.conf
It should contain something like:
--username myusername --password mypassword --update_period 60000 --alias myhost.dyndns.org --background
- Test that it works:
* Add inadyn to your 'crontab':
export EDITOR=gedit && sudo crontab -e
Edit the file to add the following line:
- Verify using:
sudo crontab -l
- When you reboot, you should see indyn listed when you type:
ps -A | grep inadyn
You should be able to log in to your Dynamic DNS provider's website and verify that the DNS entry is being updated. Certainly this is possible with www.dyndns.org, in any case. Alternatively you can type your hostname into a service like http://www.dnsstuff.com/.
Using dy.fi by cron tab
sudo crontab -e
Add lines To update ddns at 0610 mon-sat:
10 06 * * 1-6 wget --delete-after --no-check-certificate --no-proxy --firstname.lastname@example.org --password=password 'http://www.dy.fi/nic/update?hostname=yourdomain'
Add lines To redirect ddns and stop pointing 5.10pm mon-sat:
10 17 * * 1-6 wget --delete-after --no-check-certificate --no-proxy --email@example.com --password=password 'http://www.dy.fi/nic/update?hostname=yourdomain&offline=yes'
Another method is to install the perl script dyfi-update.pl from http://www.dy.fi/page/clients
Using your Modem/Router to perform Dynamic DNS Updates
Here are some example screenshots from Wireless Routers that support dynamic DNS updates:
Netgear router example:
D-Link router example:
Linksys/Cisco router example:
Redirecting a registered hostname to a dynamic DNS name
A user may already have a hostname registered with a name server that does not have Dynamic DNS capabilities. Most DNS services allow URL forwarding, however. That makes it possible to set up a free Dynamic DNS service (using the instructions above) with a free hostname (URL) and then forward the previously-registered static hostname (URL) to the Dynamic DNS hostname (URL).
For example, I set up a free Dynamic DNS hostname URL at DynDNS.com that is foobar.dyndns.org. I set up my software utility (DynDNS likes ddclient or inadyn) to constantly update the Dynamic DNS database for foobar.dyndns.org.
However, I have used example.myoriginalfoobar.com as a registered hostname (URL) for years, with a static DNS service (DinosaurDNS.org) that doesn't have Dynamic DNS capabilities. I login to DinosaurDNS.org and set my DNS record for example.myoriginalfoobar.com to forward (using a CNAME (Alias) record) to foobar.dyndns.org.
Now anyone trying to access example.myoriginalfoobar.com will be redirected to foobar.dyndns.org, which will then redirect them to whichever IP address my Dynamic DNS updating utility has specified.
Using forwarding rules, an infinite number of URLs can be forwarded to a single dynamic URL. (The primary host that resides at the destination IP address must then resolve the forwarded URLs (using virtual host or .htaccess files) and direct them to the appropriate server on the computer (or LAN).) For this reason, it is only necessary to have one dynamic DNS URL for your computer (or LAN).
Different DNS registrars have different methods of forwarding a URL, but in general there is one method common to all of them: CNAME aliases.
If you have a URL registered with a DNS registrar, go to the DNS settings for your domain name. Delete any A records (or other entries) and use only CNAME entries.
For example, let's say my free Dynamic DNS URL is foobar.dyndns.org (at DynDNS.com). My domain URL is myoriginalfoobar.com, registered at DinosaurDNS Registrar.
Logging into DinosaurDNS Registrar, I edit the DNS settings for myoriginalfoobar.com (which in my control panel is found under Manage DNS). I make sure I have these entries:
Name Type Content @ CNAME foobar.dyndns.org. www CNAME foobar.dyndns.org. example CNAME foobar.dyndns.org.
The period ("full stop") at the end of the URL is important to designate that the CNAME is a FQDN (fully qualified domain name). A CNAME should not have "http://" in it. The @ symbol indicates a URL name without the first segment, e.g. the URL myoriginalfoobar.com by itself. In this example, I am forwarding myoriginalfoobar.com, www.myoriginalfoobar.com, and example.myoriginalfoobar.com.
Using CNAME aliasing, the original URL is retained in the browser. It is up to you (using virtual host files or Rewrite rules in the .htaccess files of Apache, for example) if you wish to massage the URL at your server (to change it to a canonical name) or redirect it.
Much of this page was adapted from the original articles at:
Ubuntuguide.org Dynamic IP servers -- information about Dynamic DNS and setting up one or more webservers using Dynamic DNS with ddclient
Kubuntuguide Dynamic IP servers -- information about Dynamic DNS and setting up one or more webservers using Dynamic DNS with ddclient