The Macbook Pro 6,2 is highly compatible with Ubuntu 10.10 Maverick (and Ubuntu 10.04 Lucid). You'll need to apply some of the adjustments listed below. For further discusions, see: Ubuntu Apple Users forum

MacBookPro 6,2 and Ubuntu 10.10 (Maverick Meerkat)

This page aims to describe the steps needed, to fully enable all/most features of the 15.3 (mbp 6,2) and probably other 6-th Generation MacBookPro (release date: April 2010) when using Ubuntu 10.10, Maverick Meerkat.

You can find out, what model you have by typing at the terminal:

sudo dmidecode -s system-product-name

If you have a different model, please go here and find the right wiki.

Overview

Anything not mentioned here probably already works out of the box. If not, please refer to the Ubuntu Apple Users forum.

(works out-of-the-box) (works, with remarks) (needs manual install) (won't currently work (completely)) (not yet documented)

Basic Installation Instructions

Common things about installing and maintaining Ubuntu on Intel-based Macs: Intel CPU-based Macintosh Generic Installation Instructions

Package Support for Intel Macs

You need some modules from the MactelSupportTeam/PPA :

sudo add-apt-repository ppa:mactel-support && sudo apt-get update

The mactel PPA modules needed are mbp-nvidia-bl-dkms (driver for the LCD panel backlight) and pommed (daemon to control them all).

Note: pommed is not updated for Maverick yet, you must install from Lucid repositories until it is ready.

To install pommed Lucid version, add this to your repositories list:

deb http://ppa.launchpad.net/mactel-support/ppa/ubuntu lucid main

Then install:

sudo apt-get install pommed mbp-nvidia-bl-dkms

The system memory issue and 32/64bits kernel version

As the new MacBookPro 6,2 has 4 GB as base RAM and the Intel i5/i7 processors supports 64 bits, you may have to be careful with the selection of the architecture to install. The base 32 bits version just detects and can use up to 3,1 Gb of RAM so the rest can't be used. To solve this you can

By default, you MUST install the 64 bits Ubuntu version cause today the 64 version can be used without any problem.

For the other hand, if you select to install 32 bits version you have to take in notice that Ubuntu can't handle more that 3,1 GB of memory. As a workaround you can install the "linux-image-generic-pae" kernel package. This kernel adds support for more than 3,1 Gb and enables more features for virtualization with Xen. Just install the 32 version of Ubuntu as you would do normally and after that type this at your terminal:

sudo apt-get install linux-image-generic-pae

Note that PAE adds (extremely minor) overhead and that even with a PAE kernel, each individual process (or XEN virtual machine) will be limited to 4GB of memory.

If you choose to install 64 bits version your Ubuntu will handle more than 3,1 Gb out of the box.

Sensors (temps & fans)

To enable proper detection of sensors edit /etc/modules:

gksudo gedit /etc/modules

Add to this to end of file, save and reboot:

coretemp

If you would like to monitor temperature readings and fan speed, install sensors-applet:

sudo apt-get install sensors-applet

Reboot and then add the applet to your panel.

Temperature, fanspeed, environmental light and keyboard backlight can be controlled over the sysfs exported interface at /sys/devices/platform/applesmc.768/.

One user reported that the environmental light sensor did not work initially until he applied a not further specified firmware update.

Suspend & Hibernate

Seems to work fine out of box: multiple suspends during single session works. single hibernation works. (multiple hibernations during single session not tested).

Reboot

Rebooting and Shutdown work fine.

Video & Effects (Compiz)

You should use the restricted driver: The open source driver nouveau seems to currently causes random system freezes. Also with the powermizer functionality of the Nvidia driver you can get the laptop pretty cool at about 50 degrees Celsius instead of 65-70 degrees. Battery life is also better at about 4 hours currently (instead of 2:30).

Install from: System -> Administration -> Hardware Drivers. Select the NVidia graphics driver that says recommended and Activate. Reboot to apply the change.

Edit your /etc/X11/xorg.conf to permanently operate the Nvidia graphics adapter in the lowest possible setting:

gksu gedit /etc/X11/xorg.conf

Add the following lines to the Device section of the nvidia device:

Option  "Coolbits" "1"
Option  "RegistryDwords" "PowerMizerEnable=0x1; PerfLevelSrc=0x2222; PowerMizerLevel=0x3; PowerMizerDefaultAC=0x3"

LCD Brightness Control

Works. Either mbp-nvidia-bl-dkms alone will enable brightness control or install pommed as well. Restore of old brightness value after a resume also works.

Wait for the updates in the Mactel PPA for pommed to be updated for Maverick

Mactel PPA

or install pommed from Lucid sources by adding this to your repositories list in Synaptic:

deb http://ppa.launchpad.net/mactel-support/ppa/ubuntu lucid main

HFS+

• Read Only: Confirmed working out of the box.
• Read/Write: It is necessary to disable journal:
  • # Login macos and open a terminal. # Identify the partition

$ mount
/dev/disk0s2 on / [...]

• # Run this command to disable journaling

$ sudo diskutil disableJournal force /dev/disk1s2
Journaling has been disabled for volume [...] on disk1s2

CD/DVD Writing

Both writing and reading work.

Bluetooth

Confirmed working:

• Detection of devices
• PANU (e.g. use a phone as Network Access Point)
• Bluetooth Keyboard (Apple)
• Sending files to devices (OBEX push)
• Magic Mouse (Apple) work out of the box but without scroll.
• File transfer to cell phone
• Tethering of cell phone for use as modem

Not yet confirmed working:

• Bluetooth Mouse

Unless bluetooth is not working for you, ignore the information listed below:

MacBookPro6,2 notebooks use an Apple branded Broadcom BCM2046 solution that seem to be fully supported by the generic bluetooth USB (btusb) driver. Currently (May 2010) the product and device ids are not yet added to the generic USB driver and thus a workaround similar to this forum thread is required. Do not install the deb file, but exchange the btusb.c as instructed in [http://ubuntuforums.org/showpost.php?p=9867332&postcount=14|this] post.

Note that bluetooth keyboards and mice work even without the driver: there are hci to hid compatibility/emulation devices that are active as long as the bluetooth device is inactive.

[38073.885671] Bluetooth: Generic Bluetooth USB driver ver 0.7
[38073.886642] usbcore: registered new interface driver btusb
[38073.911497] Bluetooth: L2CAP ver 2.14
[38073.911503] Bluetooth: L2CAP socket layer initialized
[38073.941353] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[38073.941357] Bluetooth: BNEP filters: protocol multicast
[38073.951236] Bridge firewalling registered
[38073.955646] Bluetooth: SCO (Voice Link) ver 0.6
[38073.955648] Bluetooth: SCO socket layer initialized
[38074.019858] usb 1-1.1.1: USB disconnect, address 7
[38074.030511] Bluetooth: RFCOMM TTY layer initialized
[38074.030517] Bluetooth: RFCOMM socket layer initialized
[38074.030520] Bluetooth: RFCOMM ver 1.11
[38074.288792] usb 1-1.1.2: USB disconnect, address 8
[38220.936249] bnep0: no IPv6 routers present

Keyboard Functions

Everything seems to work with pommed installed:

• F1 and F2 can be used to adjust display brightness
• F3 and F4 can be correctly associated with any command in the system preferences.
• F5 and F6 can be used to adjust keyboard backlight brightness
• F7, F8 and F9 are correctly associated with audio player's 'previous', 'play/pause', 'forward' commands.
• F10, F11, F12 correctly mute and tune audio volume (after having correctly configured audio, see below)
• Eject key works

Keyboard backlight without pommed

Consider this if you want a way to control the backlight from the command line or with the mouse.

You can choose a value from 0 to 255 to tune the keyboard backlight by writing to /sys/class/leds/smc::kbd_backlight/brightness. For example this command switches the light completely on:

echo 255 | sudo tee -a /sys/class/leds/smc::kbd_backlight/brightness

The file reporting the ambient light sensor is /sys/devices/platform/applesmc.768/light (the number 768 in the path might be different on your machine). To read the value do

cat /sys/devices/platform/applesmc.768/light

which should give different values under different light conditions.

With the following method you can control the backlight through a GUI. Create a new file in /usr/local/bin:

gksu gedit /usr/local/bin/keyboard-backlight

Copy this script into the file and save it:

# A little script to set the keyboard backlight
# Note: clicking "Cancel" in the dialog sets the backlight to 0.
# Note: needs to be called as root (with gksu or sudo) because
# of writing to /sys. Use "sudo visudo" to edit the /etc/sudoers file
# if you want to allow non-admin users to change this value, possibly
# without having to enter a password. Read "man sudoers" and, e.g., use
# ALL ALL = NOPASSWD:/usr/local/bin/keyboard-backlight
# to allow all users to execute this command on all hosts without
# a password.

# Read current value
BACKLIGHT=$(cat /sys/class/leds/smc::kbd_backlight/brightness)

BACKLIGHT=$(zenity \
        --title "Keyboard backlight" \
        --scale \
        --text="Adjust the keyboard backlight" \
        --value="$BACKLIGHT" \
        --min-value="0" \
        --max-value="255")

echo $BACKLIGHT | tee -a /sys/class/leds/smc::kbd_backlight/brightness
exit 0

Use this command to make the file executable:

sudo chmod +x /usr/local/bin/keyboard-backlight

You may want to create a launcher on the panel. In this case enter

gksu /usr/local/bin/keyboard-backlight

as the command line. Very smartly, the dialog will recognise the word "keyboard" and suggest a good launcher icon automatically.

You could also use the ambient light value to extend the script to make the backlight depend on the ambient light.

Touchpad (bcm5974)

The touchpad works out of the box. However, not all gestures work yet and momentum scrolling does not work. You can enable two-finger scrolling from the preference->mouse->touchpad applet. If you are having accidental clicks while moving the mouse, it also may help you to uncheck the "Enable mouse clicks with touchpad" checkbox under the Touchpad tab. Furthermore tweaking the drag and drop time to be less may be help. The click-and-drag also works.

Wireless (AirPort)

Works out of box.

iSight

Confirmed to be working using cheese.

Sound

Internal speakers and headphones work out of box. However, internal speakers are muted. The volume for the front speaker (Front Sp) must be unmuted and turned up. This can be adjusted by running alsamixer from the Terminal, or using gnome-alsamixer

sudo apt-get install gnome-alsamixer

To enable the optical output (you'll see a red light coming from your headphone jack if it is enabled), make sure that the IEC958 option is checked.

Microphone

To get the microphone working, in terminal run:

gksudo gedit /etc/modprobe.d/alsa-base.conf

Add the following line to the end of the file. Save the file. Reboot.

options snd-hda-intel model=mbp55

External Monitor

You may experience some trouble with the external VGA and the new drivers: if the detected resolution of externally connected monitors doesn't go beyond 640x480, you will need to inactivate EDID. Add:

Option     "NoEDID" "True"

to /etc/X11/xorg.conf

Apple Remote Control

Install gnome-lirc-properties:

sudo apt-get install gnome-lirc-properties

gnome-lirc-properties will give you an entry "Infrared Remote Control" in menu System > Administration. After launching this it will guide you through the configuration. Tested with remote model No A1294 (aluminum Apple remote): gnome-lirc-properties detects the signals (with some models the Enter button is detected as an additional Play button). Although this seems to work, the remote does not actually control any applications, like the Totem Movie Player - more testing is required. Could be that the key-binding are incorrect.

Firewire

Not yet tested. Ethernet over Firewire (modprobe eth1394) tested and confirmed working.

Magic Mouse

If you want to get scrolling working on an Apple Magic Mouse, you must install the multitouch driver.

sudo add-apt-repository ppa:chasedouglas/multitouch
sudo apt-get update
sudo apt-get install multitouch-kernel-source

Scrolling works after a reboot.

CategoryMac

CategoryMac CategoryMac