D-Link WUA-2340 For version 7.0.4 you'll want to follow the below instructions: These will also work for the WDA-2320 as well, you'll want the driver set for it instead though.
1. Install the O/S, 2. Download the updates, 3. Install ndiswrapper using add/remove, 4. Use the instructions here: https://help.ubuntu.com/6.10/ubuntu/...ml#ndiswrapper modifying the first instruction, to point to the folder that you put the drivers in. I reccommend just grabbing the updated drivers from D-Link's site, version 1.01, and extracting them to get the files on a windows machine first, then save those files in a folder on your desktop, I chose "drivers". So my first line read
sudo ndiswrapper -i ~/Desktop/drivers/NetA5AGU.inf
and the rest just worked afterwards. 5. Once finished with that, reboot. It should find the device, click on the network and add your network in, add the WPA-PSK2 encryption in, and it should log into your network. When asked for the key-ring password, put in the same password used for your account log-in, you'll find out why below. 6. Finally finish up by following the instructions here: https://help.ubuntu.com/community/Wi...34115395c7d904 to fix it so you didn't have to worry about the network not being able to start when logging in. This helps because you don't need to know the network access key to log into it each time you restart the computer.
Basically all you do is download the preconfigured file, then edit it with:
gksudo gedit gdm
#%PAM-1.0 auth requisite pam_nologin.so auth required pam_env.so @include common-auth @include common-account session required pam_limits.so @include common-session @include common-password ## Added for pam-keyring so that NetworkManager doesn't ask for Keyring password. ## Please note that keyringpassword and login password must be the same. auth optional pam_keyring.so try_first_pass session optional pam_keyring.so